Config.port.blocked - HP Surestore 64 - Director Switch User Manual

Output
The LAN configuration data is displayed as a table that includes the following properties.
IP Address The IP address.
Gateway Address The gateway address.
Subnet Mask The subnet mask.
Output Example
The output from the config.ip.show command displays as follows.
IP Address: 10.0.0.0
Gateway Address: 0.0.0.0
Subnet Mask: 255.0.0.0

config.port.blocked

Syntax
blocked portNumber blockedState
Purpose
This command sets the blocked state for a port.
Parameters
This command has two required parameters.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
blockedState
Specifies the blocked state for the port. Valid values are
Boolean 1 and 0 may be substituted as values.
true false
and .
config 23