Config.snmp.authtraps - HP Surestore 64 - Director Switch User Manual

trapRecipient Specifies the trap recipient. Values must be 4 bytes in dotted-decimal format.
udpPortNum Specifies the UDP port number to which the director will send traps for each
recipient. The values must be a decimal number; the default value is 162.
Valid values include all legal UDP port numbers.
Command Example
Root>
config snmp addCommunity 1 "CommunityName1" enabled 123.123.1
23.123 162

config.snmp.authTraps

Syntax
authTraps enabledState
Purpose
This command enables or disables the authorization traps to be sent to SNMP management
stations when unauthorized stations try to access SNMP information from the director or
switch.
Parameters
This command has one parameter.
enabledState
Specifies whether the authorization traps are enabled. Valid values are
and
Command Examples
Root>
config snmp authTraps true
Root>
config snmp authTraps 1
false
. Boolean 1 and 0 may be substituted as values.
true
config 35