HP Surestore 64 - Director Switch User Manual page 112

This appendix lists and explains error messages for the Command Line Interface. Any
error numbers that are not listed are reserved for future use.
Note that the message that is returned is a string that includes both the error number and
the text of the message.
Message
Error 08: Invalid Switch Name
Error 09: Invalid Switch
Description
Error 10: Invalid Switch
Location
Error 11: Invalid Switch
Contact
Error 12: Invalid Port Address
Error 13: Invalid Port Number
Error 14: Invalid Port Name
Error 15: Invalid BB Credit
100 Appendix
Cause/Solution
The value entered for the switch name is invalid. The name for
the director or switch can contain 0–24 characters. Enter a name
with 0–24 characters. If spaces are used, enclose the name in
quotation marks.
The value entered for the switch description is invalid. The
description for the director or switch can contain 0–255
characters. Enter a description with 0–255 characters. If spaces
are used, enclose the name in quotation marks.
The value entered for the switch location is invalid. The location
for the director or switch can contain 0–255 characters. Enter a
location with 0–255 characters. If spaces are used, enclose the
location in quotation marks.
The value entered for the switch contact is invalid. The contact
for the director or switch can contain 0–255 characters. Enter a
contact with 0–255 characters. If spaces are used, enclose the
contact in quotation marks.
The value entered for the port address is invalid. Enter a valid
port address.
The value entered for the port number is invalid. Enter a port
number within the range supported by your director or switch.
Valid values are:
0–63 for the FC-64
The value entered for the port name is invalid. The port name for
the individual port can contain 0–24 characters. Enter a name
with 0–24 characters. If spaces are used, enclose the name in
quotation marks.
The value entered for the buffer-to-buffer credit is invalid. The
buffer-to-buffer credit must be an integer in the range 1–60.
Enter a value in the range 1–60 characters. A buffer-to-buffer
credit is not used for ports configured for extended distance.