Config.switch.ratov - HP Surestore 64 - Director Switch User Manual

Command Example
Root>
config switch priority principal

config.switch.raTOV

Syntax
raTOV timeoutValue
Purpose
This command sets the R_A_TOV for the switch.
Description
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
E_D_TOV .
Parameters
This command has one parameter.
timeoutValue Specifies the new R_A_TOV value. The units for this value are tenths of a
second. This parameter must be an integer in the range 10–1200 (1 second
to 120 seconds), and it must be larger than the E_D_TOV.
Command Example
Root>
config switch raTOV 20
42 config