config.switch
All of the config.switch commands, except for the config.switch.show command, require
that the switch first be set offline. (Use the maint.system.setOnlineState to set the switch
offline.) If these commands are entered while the switch is online, an error message
results.
config.switch.bbCredit
Syntax
bbCredit bbCreditValue
Purpose
This command sets the buffer-to-buffer credit value for all ports, except those ports
configured for extended distance.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
bbCreditValue
Specifies the new buffer-to-buffer credit value. This parameter must be an
integer in the range 1–60.
Command Example
Root>
config switch bbCredit 2
38
config