HP Surestore 64 - Director Switch Manual page 53

Snmp support manual
Hide thumbs Also See for Surestore 64 - Director Switch:
Table of Contents

Advertisement

Table 2-24
Variable
ef6000PortLinkFailures
ef6000PortCrcs
ef6000PortTruncs
Port Binding Group
Table 2-25
Variable
ef6000PortBindingIndex
ef6000PortBindingFlag
ef6000PortConfiguredWWN
ef6000PortAttachedWWN
Zoning Group
Table 2-26
Variable
ef6000ActiveZoneSetName
ef6000ActiveZoneCount
Fibre Channel Port Group Table Variables (cont'd)
Provides:
The number of transitions to an LFx state.
The number of CRC errors detected from frames received.
The number of frames shorter than the Fibre Channel minimum.
Port Binding Group Table
Provides:
The fixed port number on the director. It ranges from 1 to the number of
physical ports that can be supported by the director.
The flag indicates whether or not Port Binding is in effect for an individual; port.
The values are: yes (1), and no (2).
The authorized port WWN for attached servers and storage systems (F ports),
or the authorized director WWN for attached directores (E ports).
The WWN of the device currently attached to the port whether it has
successfully connected or is currently being rejected due to a port binding
violation.
Zoning Group Table
Provides:
The active zone set name.
The count of zones included in the active zone set.
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surestore director fc-64

Table of Contents