HP Surestore 64 - Director Switch Manual page 38

• Capability (FcFeCap)
The following sections define the FCFE MIB variables and their output. All variables in
the FCFE MIB except for fcFxPortPhysAdminStatus, which is defined under
fcFxPortPhysTable in fcFeOp group, are read-only.
Error Group Table
This Fcfporterrrortable displays the number of errors detected by an F_Port since the
management agent initialized, enabling you to determine the quality of the link between
the F_Port and its attached N_Port.
Table 2-13
Variable
fcFxPortErrorModuleIndex Module index.
fcFxPortErrorPortIndex
LinkFailures
SyncLosses
SignalLosses
PrimSeqProtErrors
InvalidTxwords
InvalidCRCs
DelimiterErrors
AddressIdErrors
LinkResetIns
LinkResetOuts
OlsIns
OlsOutss
32
Error Group
Provides the Number of:
Port index.
Link failures detected by the F_Port.
Synchronization losses detected by the F_Port.
Signal loss errors detected by the F_Port.
Primitive sequence protocol errors detected by the F_Port.
The number of invalid transmission words detected by the F_Port.
The number of invalid cyclic redundancy checks (CRC) detected by the F_Port.
Delimiter errors detected by the F_Port.
Address identifier detected by the F_Port.
Link reset protocol received by the F_Port from the attached N_Port.
Link reset protocol errors issued by the F_Port to the attached N_Port.
Offline sequences received by the F_Port.
Offline sequences issued by the F_Port.