HP Surestore 64 - Director Switch Manual page 34

Table 2-8
Object
connUnitLinkPortNumberY
connUnitLinkPortWwnY
connUnitLinkAgentAddressY
connUnitLinkAgentAddressTypeY
connUnitLinkAgentPortY
connUnitLinkUnitTypeY
connUnitLinkConnIdY
Fabric Statistics
The fabric statistics table contains Fibre Channel port statistics for a given director.
Table 2-9
Object
connUnitPortStatFabricUnitId
connUnitPortStatFabricIndex
connUnitPortStatFabricCountError
connUnitPortStatFabricCountTxFrame
connUnitPortStatFabricCountRxFrame
connUnitPortStatFabricCountTxOctets
connUnitPortStatFabricCountRxOctets
28
Link Table (cont'd)
Provides
The port number associated with the remote port on this link. This
information is available for E ports only.
The port WWN associated with the remote port on this link. This
information is available for F ports only.
Not supported
Not supported
Not supported
If the port is an E_Port, switch (4) is returned. Otherwise, unknown (1) is
returned.
For F_Ports, the 24-bit Fibre Channel address is returned. For E_Ports,
the domain ID of the attached director is returned.
Fabric Statistics Table
Provides
The connUnitId of the director associated with this entry. This
table is indexed by this object and the
connUnitPortStatFabricIndex object.
Values returned range from 1 to 32, and represents the physical
port number + 1.
The sum of address ID errors, CRC errors, delimiter errors,
encoding disparity errors, frame EOF errors, frames too long,
frames too short, invalid ordered sets, invalid transmission words,
link failures, and primitive sequence errors is returned.
The count of transmitted frames is returned.
The count of received frames is returned
Not supported
Not supported