Figure 4
Use the following SNMP commands with the MIB variables:
•
get
Retrieves the value of variables at the agent.
•
set
Sets the value of variables at the agent.
•
trap
Notifies the management station of significant events.
Each group and variable in a MIB is assigned a numerical address. You can enter
commands with variables specified as a name or a number. For example:
get {root, iso, org, dod, internet, mgmt, mib-2, system}
or
get {root, 1, 3, 6, 1, 2, 1, 1}
12
internet (1)
experimental
mgmt (2)
(3)
Fabric Element
MIB - II
MIB
private (4)
ED-5000
MIB