HP Surestore 64 - Director Switch Manual page 26

Connectivity Unit Group Objects
The Connectivity Unit Group contains information about the director switches that are
configured in the HP EFC Server. The group contains five simple objects and four tables;
Connectivity Unit, Firmware, Port, Sensor, and Event.
Table 2-2
Object
uNumber
systemURL
StatusChangeTime (deprecated)
ConfigurationChangeTime (deprecated)
connUnitTableChangeTime
(deprecated)
The connectivity unit table contains general information on the connectivity units. Each
row in the table contains information for a particular director.
Table 2-3
Object
ConnUnitId
connUnitGlobalId
ConnUnitType
20
Connectivity Unit Group Objects
Provides
The number of managed connectivity units (directors) defined to
the HP EFC Server.
The http://[EFCM addr]/cgi-bin/launch.exe string is returned,
where EFCM addr is the IP address of the HP EFC Server. If HP
EFC Manager Version 1.1 or higher is installed on the PC,
accessing this URL from a browser will start the HP EFC
Manager application.
The value of statusChangeTime is updated whenever the status
or state of any director managed by the HP EFC Server changes.
Use of this object was deprecated in the 2.0 version of the MIB.
Not supported. Use of this object was deprecated in the 2.0
version of the MIB.
This value is updated whenever a managed unit is added or
deleted from HP EFC Manager. Use of this object was
deprecated in the 2.0 version of the MIB.
Connectivity Unit Table
Provides
This is an octet string that identifies a particular director managed by a given
HP EFC Server.
The Node WWN of the director is contained in the first 8 octets of the returned
octet string. If the link between the HP EFC Server and the switch is down, the
string values are all zeros.
A constant value of switch(4) is returned.