HP Surestore 64 - Director Switch Manual page 29

Table 2-3
Object
ConnUnitLocation
Read/write
ConnUnitEventFilter
ConnUnitNumEvents
connUnitMaxEvents
connUnitEventCurrID
The firmware table contains information on the firmware revisions supported by a
particular connectivity unit.
Table 2-4
Object
connUnitRevsUnitId
ConnUnitRevsIndex
connUnitRevsRevId
ConnUnitRevsDescription
The sensor table contains information on the status of the fan and power supply
components on a given director.
Table 2-5
Object
connUnitSensorUnitId
connUnitSensorIndex
Connectivity Unit Table (cont'd)
Provides
On a read (Get) the configured physical location of the director is returned. This
object is writable.
This value defines the event severity that will be logged by this connectivity unit.
All events of severity less than or equal to connUnitEventFilter are logged in
connUnitEventTable.
Number of events in the connUnitEventTable.
The maximum number events in the connUnitEventTable is returned.
The current event index is used as the last used event id.
Firmware Table
Provides
The connUnitId of the director associated with this entry. This table is indexed
by this object and the ConnUnitRevsIndex object.
1 is always returned. Each director supports only one revision component.
The revision of the switch firmware.
Switch firmware is returned.
Sensor Table
Provides
The connUnitId of the director associated with this entry. This table is indexed
by this object and the connUnitSensorIndex object.
Two kinds of sensors (one fan and two power supplies) are supported in this
table. The range of the index is 1-3.
23