Fibre Channel Port Group - HP Surestore 64 - Director Switch Manual

Table 2-23
Variable
ef6000FruSerialNumber
ef6000FruPowerOnHours
ef6000FruTestDate

Fibre Channel Port Group

This group contains information about the physical state, operational status, performance
and error statistics of each Fibre Channel ports on the director.
Table 2-24
Variable
ef6000PortIndex
ef6000PortPhyState
ef6000PortOpStatus
ef6000PortAdmStatus
(read-write)
ef6000PortConnector
ef6000PortDistance
ef6000PortType
44
FRU Group Table Variables (cont'd)
Provides:
Serial number of the module.
Number of the hours that the FRU has been in operation.
Final test date of the module.
Fibre Channel Port Group Table Variables
Provides:
Director port number.
Physical state of the port.
Operational status of the port. The values are defined as follows: online(1),
offline(2), testing(3), and faulty(4). The online state indicates that user frames
can be passed.
The desired state of the port. A management station may place the port in a
desired state by setting this object accordingly. The testing (3) state indicates
that no user frames can be passed. As the result of either explicit management
action or per-configuration information accessible by the director,
edFcPortAdmStatus is then changed to either the online (1) or testing (3)
states, or remains in the offline state.
Supported connector types of the port. The values are defined as follow:
unknown(1), lc(2), mt-rj(3), mu(4)
A bit map to represent distance types of the Port. bit 0 unknown, bit 1-3
reserved, bit 4 long distance (l), bit 5 intermediate distance (i), bit 6 short
distance (s), bit 7 very long distance.
Supported transceiver types of the port. The values are defined as follows:
unknown (1), longDistance(2) -- (LL-V), longWaveLaser-LL(3) -- (LL),
shortWaveLaser-OFC(4) -- (SL), shortWaveLaser-noOFC(5) -- (SN),
longWaveLaser-LC(6) -- (LC).