Signal Loss Area Messages; Probable Cause; Recommended Action; Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Description
Troubleshooting

Signal Loss Area Messages

Probable Cause

A loss of signal usually indicates a physical problem.

Recommended Action

Check both ends of your connection and verify that your cable is not faulty.

Messages

Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Fabric Watch Version 3.1.x/4.1.x User Guide
Explains that the number of synchronization losses per minute has changed
from a value outside of the acceptable range to a value within the acceptable
range. Provides the new value.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
FW-CHANGED, 4, portSignal<element index> (Port Loss of Signal
<element index>) value has changed. current value : <value>
Error(s)/minute. (info)
Explains that the number of signal losses per minute has changed. Provides
the new value.
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation.
FW-ABOVE, 3, portSignal<element index> (Port Loss of Signal <element
index>) is above high boundary. current value : <value> Error(s)/minute.
(faulty)
Explains that the number of signal losses per minute has risen to a value
above the high boundary. Provides the new value.
Loss of signal generally indicates a physical problem. Check both ends of
your cable connection. Verify that the cable is not faulty.
FW-BELOW, 3, portSignal<element index> (Port Loss of Signal <element
index>) is below low boundary. current value : <value> Error(s)/minute.
(normal)
Responding to Fabric Watch Messages
129