Fabric-Class Threshold Defaults - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Table 35
Table 35: Fabric-Class Threshold Defaults
Area
E_Port Downs
Fabric
Reconfiguration
Domain ID
Changes
Segmentation
Changes
Zone Changes
Fabric Watch Version 3.1.x/4.1.x User Guide
provides default settings for areas in the Fabric class.
Default Threshold
Description
Monitors E_Port Unit: Down(s)
status Time Base:
Low: 0
High: 0
Buffer: 0
Monitors Unit: Reconfig(s)
configuration Time Base:
changes Low: 0
High: 0
Buffer: 0
Monitors Unit: DID Change(s)
forcible Time Base:
DOMAIN Id Low: 0
changes High: 0
Buffer: 0
Monitors Unit: Segmentation(s)
segmentation Time Base:
changes Low: 0
High: 0
Buffer: 0
Monitors zone Unit: Zone Change(s)
changes Time Base:
Low: 0
High: 0
Buffer: 0
Default Alarm
Settings
Changed: 0
Exceeded: 0
Below: 0
Above: 0
In-between: 0
Changed: 0
Exceeded: 0
Below: 0
Above: 0
In-between: 0
Changed: 0
Exceeded: 0
Below: 0
Above: 0
In-between: 0
Changed: 0
Exceeded: 0
Below: 0
Above: 0
In-between: 0
Changed: 0
Exceeded: 0
Below: 0
Above: 0
In-between: 0
Default Threshold Values
Threshold
Settings State
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
Informative
217