Fabric Watch Telnet Commands; Introduction - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Fabric Watch Telnet Commands

Introduction

This appendix defines Fabric Watch telnet commands. You can access telnet
commands through the shell admin account when you install the license key. To
use a telnet command, log into the relevant switch with administrative privileges,
enter the command along with any required operands, and press Enter.
summarizes the Fabric Watch telnet commands.
Table 18: Fabric Watch Telnet Commands
fwclassinit
fwconfigreload
fwconfigure
fwshow
fwalarmsfilterset
fwalarmsfiltershow
fwsettodefault
fwsettocustom
fwmailcfg
fwhelp
fwsamshow
switchstatuspolicy
set
switchstatuspolicy
show
switchstatusshow
You can access Fabric Watch software simultaneously from different connections
with telnet, SNMP, and HP Web Tools, or by modifying and uploading the Fabric
swatch configuration file to the switch.
174
Command Description
Initializes all classes under Fabric Watch.
Reloads the Fabric Watch configuration.
Displays threshold information and lets the
user configure threshold behaviors.
Displays the thresholds that Fabric Watch
monitors.
Configures alarm filtering for Fabric Watch.
Displays alarm filtering for Fabric Watch.
Sets boundaries and alarms to default
configurations.
Sets boundaries and alarms to custom
configurations.
Configures email alert.
Lists Fabric Watch-related commands and
their functions.
Displays SAM information.
Sets the policy parameters for calculating the
overall status of the switch enclosure.
Displays the policy parameters that determine
the overall switch status.
Displays the overall status of the switch.
Fabric Watch Version 3.1.x/4.1.x User Guide
Table 18
Page
176
177
178
179
180
181
182
183
184
187
188
189
193
195