HP StorageWorks MSA 2/8 - SAN Switch User Manual page 194

Fabric Watch Telnet Commands
The policy parameters determine the number of failed or non-operational units for
each contributor that trigger a status change in the switch. For example, if the
FaultyPorts DOWN parameter is set to 3, and 3 ports fail in the switch, then the
status of the switch changes to DOWN.
Operands
None.
Example
See Also
switchstatusshow
switchstatuspolicyset
194
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
----------------------------------
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
Fans
PortStatus
ISLStatus
Down Marginal
2 1
0 0
2 1
2 1
2 1
0 0
0 0
Fabric Watch Version 3.1.x/4.1.x User Guide