State Changes Area Messages; Probable Cause; Recommended Action; Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Responding to Fabric Watch Messages
Message
Description
Troubleshooting

State Changes Area Messages

Probable Cause

The state of the port has changed for one of the following reasons:

Recommended Action

All State Changes messages are informational. Respond to this message as is
appropriate to the particular policy of the end-user installation.

Messages

Message
Description
138
FW-INBETWEEN, 3, portTXPerf<element index> (Port TX
Performance<element index>) is between high & low boundaries. current
value : <value>KB/s. (info)
Explains that the amount of traffic that the switch transmits from the port (in
kilobytes per second) has changed from a value outside of the acceptable
range to a value within the acceptable range. Provides the new value.
All transmit-performance messages are informational. Respond to this
message as is appropriate to the particular policy of the end-user installation.
The port has gone offline.
The port has come online.
The port is testing.
The port is faulty.
The port has become an E_Port.
The port has become an F_Port.
The port has segmented.
The port has become a trunk port.
FW-CHANGED, 4, portState<element index> (Port State
Changes<element index>) value has changed. current value : <value>
Change(s)/minute. (info)
Explains that the number of times per minute that the port has switched to a
different port-type has changed. Provides the new value.
Fabric Watch Version 3.1.x/4.1.x User Guide