Nikon COOLPIX S230 User Manual page 160

rl
z
148
Display
(blinks)
_q
The following table lists the error messages and
monitor, as well as the solutions for dealing with them.
Problem Solution
Set clock.
Prepare to charge or
change battery.
Charge or change battery.
Clock not set.
Battery running low.
Battery exhausted.
Battery temperature is
high.
O
Battery exhausted.
(9
Battery temperature
high
other warnings displayed in the
Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the
)ower-on lamp and flash
lamp will blink rapidly.
After the lamps blink for
three minutes, the camera
will turn off automatically.
Pressing the power switch
also turns off the camera.
Memory card is write
protected.
0
This card cannot be
used.
@
This card cannot be
read.
O
Card is not formatted.
Format card?
Yes
No
E_3
130
16
16
19
_e (e blinks red) Camera cannot focus. • Refocus. 28, 29
• Use focus loci<. 117
(D Camera cannot perform Wait until message clears 29
Please wait for the other operations until from display automatically
camera to finish recording is complete, when recording is
recording, complete.
O Write-protect switch is in Slide write-protect switch 23
"lock" position, to "write" position.
Error accessing memory 143
card. 22
Memory card has not been
formatted for use in
COOLPIX S230.
• Use approved card.
• Check that connectors
are clean
• Confirm that memory
card is correctly inserted
Tap Yes to format card, or
turn camera offand
replace card.
22
23