Welcome Screen - Nikon COOLPIX S230 User Manual

_1_ Notes on Electronic Vibration Reduction
Except during slow sync mode, Electronic VR will not activate when flash is used,
if the exposure period exceeds a certain period of time, Electronic VR will not function,
The effectiveness of Electronic VR decreases as camera shake increases.
Electronic VR does not reduce the effects of subject movement,
Saving a picture on which Electronic VR is applied may take some time.
Electronic VR will not activate when sensitivity is ISO 800 or above.
Electronic VR ca nnot be used together with date imprint ([.]]_) 133). When using date imprint,
setting Electronic VR to Auto automatically changes the date imprint setting to Off,
• Electronic VR and auto flash with red eye reduction cannot be used together.
[] Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu (_ 83) and enable
Electronic VR (_ 84),
Welcome Screen
-)' V (Setup menu) ([_ 128) -) Welcome screen
You can select the welcome screen to be displayed when the camera is turned on.
None (default setting)t
No welcome screen will be displayed.
COOLP!X
Displays a welcome screen,
Select
an
image
Select a picture in the internal memory or on the memory card for the welcome
screen. Choose a picture in the picture selection screen and tap m.
As the selected image is stored in the camera, the image will appear in the welcome
screen even if the original picture is deleted.
• Pictu res taken at an Image mode setting of _ 16:9 (3584) ([_]] 10% a nd copies
created at a size of 320 × 240 size or smaller using the crop ([_]] 56) or small
picture ([_]] 65) function, cannot be used.
o
5"
n
Y
o_
129