Rear Panel Jacks - Curtis Mathes CM27020S Owner's Manual

Your NEw TV
Rear Panel Jacks
Use the rear panel,jacks to connect an A/'V"component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input.jacks, you can connect two different A/V"
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 - 2.7.
O
O
O
COMPONENT VIDEO INPUT O
(Y, PB, PR)
(For models CM27020S/CMF2010S)
Use these jacks to connect the component video
signal from a DVD player. 0
VIDEO INPUT
Video signals from VCRs, DVD players and similar
devices.
AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
0
AUDIO MONITOR OUTPUTS
Send audio signals from the TV to an external
source such as a VCR.
SUPER VIDEO INPUT jack
(For model CM25020S)
S-Video signal from an S-VHSVCRor laserdisc
player.
VHF/UHF (75£2)
Connect to an antenna or to a cable TV system.
1.3 C,A}'T_ R oN: ¥o,_ N},w
TV