Changing Channels; Directly Accessing Channels; Using Mute - Curtis Mathes CM27020S Owner's Manual

0 PERATION ]
Changing Channels
Using the Channel Buttons
Press the CH A or CH V buttQnto change channels.
When you press CH • or CH V, the TV changes chaimels ii] sequence. You will see all the
channels that the TV has meinorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not meinorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel
Press the numbgr buttons tO go directly to a channel.
For example, to sq!#ct channe! 27, press i12/!then "7"
The IV w!!! change channe!s when You p[ess the
second number,
When you use the number buttons, you can directly select channels that were either erased or
not meiTlorJzed.
To select a channel ()vet" 100, press the +100 button. (For channel 122, press "+100," then "2,"
then "2.")
To change to single digit channels (0 9) faster, press "0" beR)re the
single digit. (]:'or channel "4," press "0," then "4.")
Using the PRE-CH Button to select the Previous Channel
channels that are f_ll"apart, tune to
Pressthe PRE-OBbuttonl one channel, then use the number
The TVwill switch to the last channel viewed, button to select the second channel.
Then, rise the PRE CH button to
quickly alternate between them.
Adjusting the Volume
Press the V01+ or V0f button to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound
using
the Mute button.
Press the MU]'E button and the sound cuts off,
To turn mute off, p[ess the IVIUIE button again, or simply pr?ss
eithertheVO[- orVO[+ button.
3.6 (ltAPqr }/ T]tI_Fr : TV OPERATION