Connecting A Camcorder - Curtis Mathes CM27020S Owner's Manual

INSTALLATION
Connecting a Camcorder
The front panel,jacks on your TV make it easy to connect a camcorder to your TV[
They allow you to view the camcorder tapes without using a VCR. (Also see "Viewin_ a VCR
_J Camcorder Tape on page 3.13)
Locate the AiV outou[
jacks on the camcorder.
1-hey are usually found on
the side or back af the
camcorner
2
Connect ar audio cable
between the AUD 0 OUT-
PUTjack on tne cam-
corder and the AUDIO
[erminals on the front of
the TV,
3
Connect a
vloeo
cable
between LheVIDEO OUT-
PUTjack on the cam-
corner and the VIDEO ter-
m,n_ on the front ot the
1`V.
The audio-video cables shown here are usually included with a Camcoider. (If not, check
yolu" local electronics store.) If yolu" camcorder is stereo, you need to connect a set of two
cables.
C HAP'H,:]_ TWO: [NSTAIlAq]()N
2,7