Antennas With 75-Ohm Round Leads; Separate Vhf And Uhf Antennas - Curtis Mathes CM27020S Owner's Manual

I INSTALLATION I
Antennas with 75-ohm Round Leads
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back pane!.
Separate VHF and UHF Antennas
If you have two separate antennas for yollr TV (one VHF and one UHF), you mllst
combine the two antenna signals before connecting the antennas to the TV[ This
procedure requires a an optional combiner-adaptor (available at most elecHt-)nics shops).
Connect both antenna
leads to the combiner.
i
2 ........
Plug the combiner in
VHF!UHFtermina! on the
botto m o[the tea[ panel
i
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Plug the incoming cable
into the VHF/UHFantenna
terminal on back of the TV.
/.4.
_1 Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
2. 2 CHAPq_ }/ TWO: INSTAI IA'II()N