Memorizing The Channels; Selecting The Video Signal-So* Uve - Curtis Mathes CM27020S Owner's Manual

OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are l_-_emoi'ized, llse the CH • and
CH • buttons to scan through the channels. This eliminates the need to change chan-
nels by entering
the channel digits. There are three steps for memorizing channels:
selecting a broadcast solli'ce, memorizing the channels (automatic) and adding and
deleting channels (manllal).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify
the type of signal SOili'ce that is connected to the TV (i.e., ai'l antenna or a cable system).
PressMENU
to ;o .... 0 _ ,-_:,:,.
display th9 menu,
selo t pres . *twotimesto ,o,anne,,,, t,o,
press th e v0 L + bUtt0nl
Note: ST[), HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identif}/the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to "Storing Channels in Memory"
(i]ext page).
Press MENU twice to exit.
( ]tAP'F} R THRI:} : TV OP} RAq]ON 3, _*_