Connecting To A Cable Box That Descrambles - Curtis Mathes CM27020S Owner's Manual

INSTALLATION
Connecting to a Cable Box that Descrambles AI__IChannels
1
Find the cable that is con:
nected to the ANTENNA
0UT terminal 0n YoU r
-.91 This terminal inight he labeled
"ANT OUT," "VHF OUT;" or siinply,
"OUT."
i i i
Connect
this cable to the VHFIUHF
antenna terminal on the
Connecting to a Cable Box that Descrambles Some Channels
If yollr cable box descramb]es only some channels (sl K'h as premillm channels), follow the
instITK'tions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of"
coaxial cable. (These items are available at most electronics stores.)
Find ant alsconnecr me
cable that is connected to
the ANTENKA IN
[erminal on your cable
box,
_1 This terminal might be labeled
"ANT IN," "VHF IN," or simply,
"IN."
2
Connec_this
CaBle [O
a
[wo-way SpllEer
Connect a coaxial cable
oe[ween an OUTPUTter-
minal on the splitter and
the IN terminal on the
cable box
CHAPTH_ Two: [NSTAI ] A'I]ON
2.3