File System Management - Dell PowerEdge M IO Aggregator Command Reference Manual

File System Management

The Dell Force10 system can use the internal Flash, USB Flash, or remote devices to store files. The
system stores files on the internal Flash by default, but you can configure it to store files elsewhere.
To view file system information:
Task
View information about each file system.
The output of the
memory, file structure, media type, and read/write privileges for each storage device in use.
Figure 4-13. show file-systems Command Example
FTOS#show file-systems
Size(b)
2143281152
FTOS#
You can change the default file system so that file management commands apply to a particular device or
memory.
To change the default storage location:
Task
Change the default directory.
You can change the default storage location to the USB Flash
then apply to the USB Flash rather than the internal Flash.
36 | Getting Started
Command Syntax
show file-systems
command
show file-systems
Free(b) Feature
836878336 FAT32 USERFLASH
- -
- -
- -
Command Syntax
cd directory
(Figure 4-13) shows the total capacity, amount of free
Type Flags Prefixes
rw flash:
- network rw ftp:
- network rw tftp:
- network rw scp:
(Figure
Command Mode
EXEC Privilege
Command Mode
EXEC Privilege
4-14). File management commands