Dell PowerEdge M IO Aggregator Command Reference Manual page 149

Mxl 10/40gbe switch io module ftos command reference guide, ftos 8.3.16.1
Hide thumbs Also See for PowerEdge M IO Aggregator:
Table of Contents

Advertisement

Figure 10-12. show interface port-channel Command Example
FTOS#show interface port-channel
Port-channel 1 is up, line protocol is up
Created by LACP protocol
Hardware address is 00:1e:c9:f1:03:58, Current address is 00:1e:c9:f1:03:58
Interface index is 1107755009
Minimum number of links to bring Port-channel up is 1
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :lag1001ec9f10358
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed 50000 Mbit
Members in this channel:
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:13:56
Queueing strategy: fifo
Input Statistics:
836 packets, 108679 bytes
412 64-byte pkts, 157 over 64-byte pkts, 135 over 127-byte pkts
132 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
836 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles, 0 CRC, 0 overrun, 0 discarded
Output Statistics:
9127965 packets, 3157378990 bytes, 0 underruns
0 64-byte pkts, 133 over 64-byte pkts, 3980 over 127-byte pkts
9123852 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
4113 Multicasts, 9123852 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec,
Output 34.00 Mbits/sec,
Time since last interface status change: 00:13:49
Port-channel 128 is up, line protocol is up
Created by LACP protocol
Hardware address is 00:1e:c9:f1:03:58, Current address is 00:1e:c9:f1:03:58
Interface index is 1107755136
Minimum number of links to bring Port-channel up is 1
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :lag128001ec9f10358
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed 10000 Mbit
Members in this channel:
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:14:06
Queueing strategy: fifo
Input Statistics:
476 packets, 33180 bytes
414 64-byte pkts, 33 over 64-byte pkts, 29 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
476 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles, 0 CRC, 0 overrun, 0 discarded
Output Statistics:
9124688 packets, 3156959396 bytes, 0 underruns
0 64-byte pkts, 30 over 64-byte pkts, 804 over 127-byte pkts
9123854 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
834 Multicasts, 9123854 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec,
Output 34.00 Mbits/sec,
Time since last interface status change: 00:13:57
Port-channel 1 is a dynamically-created port channel based on the
NIC teaming configuration in connected servers learned via LACP.
Te 1/2(U) Te 1/3(U) Te 1/4(U) Te 1/5(U) Te 1/7(U)
1 packets/sec, 0.00% of line-rate
12318 packets/sec, 0.07% of line-rate
Te 1/49(U)
1 packets/sec, 0.00% of line-rate
12314 packets/sec, 0.36% of line-rate
Port-channel 128 is the default port channel to
which all uplink ports are assigned by default.
Interfaces | 135

Advertisement

Table of Contents
loading

Table of Contents