Displaying Iscsi Optimization Information - Dell PowerEdge M IO Aggregator Command Reference Manual

Displaying iSCSI Optimization Information

Use the commands in
show
Table 11-2. Displaying iSCSI Optimization Information
Command
show iscsi (Figure 11-2)
show iscsi sessions (Figure
show iscsi sessions detailed [session isid]
(Figure 11-4)
show run iscsi
Figure 11-2. show iscsi Command Example
FTOS# show isci
iSCSI is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Figure 11-3. show iscsi sessions Command Example
FTOS# show isci sessions
Session 0:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Table 11-2 to display information on iSCSI optimization.
Output
Displays the currently configured iSCSI settings.
11-3) Displays information on active iSCSI sessions on the switch.
Displays detailed information on active iSCSI sessions on the switch. To
display detailed information on specified iSCSi session, enter the session's
iSCSi ID.
Displays all globally-configured non-default iSCSI settings in the current
FTOS session.
iSCSI Optimization | 153