FPI P36-NG3 Owners & Installation Manual page 38

INSTALLATION
9) Place Log 02-52 between Logs 02-51 and
02-49 and on the indentation on Log 02-54.
The bottom right end sits behind the rear
grate tab.
02-51
Log indentation
02-52
02-54
Photo shows rear grate tab.
Log 02-51 was removed to show
the positioning of Log 02-52.
02-50
38
10) Place the embers on the front of the burner
tray in the places shown on the photo.
02-49
02-52
Place embers in these 3
locations on the burner tray.
02-54
Rear
Grate
Tab
02-49
02-55
11) Test fire to ensure proper light off (make
sure flame flows smoothly from one end of
burner to the other). If there is any flame
hesitation, check that area for any blockage
of the burner ports.
12) Install flush glass and bay glass (if used) as
per instructions in this manual.
Embers
02-51
FPI P36-3 Zero Clearance Direct Vent Gas Fireplace
02-52
02-54