Email Settings - HP StorageWorks 8000 - NAS Command Reference Manual

Email Settings

54 Command Reference
The HP NAS 8000 lets you automatically notify individuals via email if there is a hardware
failure or a critical system alert.
Note
Email settings are optional. In the event of a hardware failure or system alert,
messages are sent through the network management tool or they are logged in the
system log.
getSystemEmailRecipientAddressList
Returns a list of the email addresses for the recipients of any system alert messages that may be
sent.
I outParam[0:N] = Email recipient address list
setSystemEmailRecipientAddressList
Sets the email addresses for the recipients of any system alert messages that may be sent.
I inParam[0:N] = Email recipient address list
getSystemEmailServerName
Returns the name of the SMTP mail server.
I
outParam[0] = Email server name
setSystemEmailServerName
Sets the SMTP mail server. The email server must be an IP address or a fully qualified name
(such as alpha.corp.com)
I
inParam[0] = Email server name
sendSystemEmail
Sends the specified email message to the email recipient list.
I inParam[0] = Email address
I inParam[1] = Email subject
I inParam[2] = Email body
sendSystemEmailTest
Sends a test email to the specified email address.
I inParam[0] = Email address
getSystemNameEmailAddress
Returns the email address of the specified user.
I
inParam[0] = User name
I outParam[0] = Email address