HP StorageWorks 8000 - NAS Command Reference Manual page 28

26 Command Reference
getStorageDasdScsiPerDriveLunList
Returns a list of LUNs available on the specified array or device.
I
inParam[0] = SCSI DASD name
I outParam[0:N] = SCSI DASD LUN list
getStorageDasdScsiLunList
Returns a list of LUNs that are being used in volume groups.
I outParam[0:N] = SCSI LUN name list
getStorageDasdScsiInternalLunList
Returns a list of SCSI DASD LUNs that are on internally-mounted DASDs. Internal DASD LUNs
are used for system functions. They are never used to store user data.
I
outParam[0:N] = SCSI LUN name list
getStorageDasdScsiExternalLunList
Returns a list of SCSI LUNs that are part of externally-attached (usually through a Fibre-channel
connection) DASDs. This command currently returns the same list at the
getStorageDasdScsiLunList command. getStorageDasdScsiLunList
getStorageDasdScsiLunList getStorageDasdScsiLunList
I outParam[0:N] = SCSI LUN name list
getStorageDasdScsiAvailableLunList
Returns a list of LUNs that are available for use in volume groups.
I outParam[0:N] = Available LUN number list
getStorageDasdScsiLunBlockDeviceFile
Returns the block (SCSI disk driver) device file used to access a SCSI LUN.
I
inParam[0] = SCSI LUN name
I outParam[0] = Block device file
getStorageDasdScsiLunRawDeviceFile
Returns the raw device file used to access a SCSI LUN. Raw device files are used to bypass the
system cache when writing or reading data to or from the device.
I
inParam[0] = SCSI LUN name
I outParam[0] = Raw device file
getStorageDasdScsiLunGenericDeviceFile
Returns the generic device file used to access a SCSI LUN. Generic device files are most
commonly used to send raw SCSI commands to devices.
I inParam[0] = SCSI LUN name
I outParam[0] = Generic device file