Network NIS Settings
14
Command Reference
The HP NAS 8000 supports Network Information System (NIS). NIS maintains a central
database of names and locations of resources on a network. NIS was formerly known as Yellow
Pages. To enable or disable NIS, use the following commands.
getNetworkNisDomainName
Returns the NIS domain name.
I
outParam[0] = NIS domain name
setNetworkNisDomainName
Sets the NIS domain name for the HP NAS 8000.
I
inParam[0] = NIS domain name
getNetworkNisEnabled
Returns whether the HP NAS 8000 is NIS enabled.
I
outParam[0] = T (Enabled) or F (Disabled)
setNetworkNisEnabled
Enables or disables NIS for the HP NAS 8000.
I
inParam[0] = T (Enable) or F (Disable)
getNetworkNisCurrentServerName
Returns the name of the NIS server the HP NAS 8000 system is currently connected to.
I
outParam[0] = Current NIS server name
getNetworkNisServerName
Returns the name of the NIS server the HP NAS 8000 will attempt to connect to at boot.
I
outParam[0] = NIS server name
setNetworkNisServerName
Sets the NIS server the HP NAS 8000 system will attempt to connect to at boot.
I
inParam[0] = NIS server name