HP StorageWorks 8000 - NAS Command Reference Manual page 52

50 Command Reference
clearSystemEvent
Clears a System Event. The Master Event Daemon (hpMed) will then handle things properly,
sending e-mail as well as the SNMP traps to the various targets.
getSystemEventNum
Get the event number for a given event name.
I inParam[0] = Event name
I outParam[0] = Event number
getSystemEventName
Get the name of a given event number.
I inParam[0] = Event number
I
outParam[0] = Event name CPU settings
getSystemCpuList
Returns a list of the CPUs installed in the NAS server.
I
outParam[0:N] = CPU number
getSystemCpuCurrentLoadPercent
Returns information about the current load on the specified CPU.
I inParam[0] = CPU number
I outParam[0] = Current load percent
getSystemCpuPeakLoadPercent
Returns information about the peak load on the specified CPU.
I inParam[0] = CPU number
I outParam[0] = Peak load percent
getSystemCpuAverageLoadPercent
Returns information about the average load on the specified CPU.
I
inParam[0] = CPU number
I outParam[0] = Average load percent