HP StorageWorks 8000 - NAS Command Reference Manual page 34

32 Command Reference
getStorageVolumeMountPath
Returns the mount path, if any, that is defined for UNIX® sharing of the specified file volume.
I
inParam[0] = Volume name
I outParam[0] = Volume mount path
getStorageVolumeDeviceFile
Returns the name of the device file that is used to access the specified file volume.
I inParam[0] = Volume name
I outParam[0] = Volume device file
getStorageVolumeRootPath
Returns the path to the location where user data is stored on the specified file volume.
I inParam[0] = Volume name
I
outParam[0] = Volume file system root path
getStorageVolumeVolumeMinimumCapacity
Returns the minimum capacity of the specified storage volume.
I inParam[0] = Volume name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
getStorageVolumeVolumeMaximumCapacity
Returns the maximum capacity for the specified storage volume.
I
inParam[0] = Volume name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
getStorageVolumeVolumeCapacityIncrement
Returns the capacity increment (in bytes, megabytes, and gigabytes) used to create or resize file
and snapshot volumes, i.e., when creating volumes, the capacity modulo increment must be
equal to 0.
I
inParam[0] = Volume name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
getStorageVolumeFileList
Returns a list of file volumes that exist on the HP NAS 8000 system.
I outParam[0:N] = Volume name list
getStorageVolumeFileSystemList
Returns a list of file volumes.
I outParam[0:N] = Volume name list