HP StorageWorks 8000 - NAS Command Reference Manual page 74

72 Command Reference
setClusterPackageVirtualIpAddressList
Required. Sets the given VirtualIpAddress/Subnet list for the given package.
I
InParam[0] = Package name
I InParam[1:N] = VirtualIpAddress/Subnet entries
For example:
I setClusterPackageVirtualIpAddressList pkg1 192.168.100.21/192.168.100.0
getClusterPackageVolumegroupList
Gets from the registry, the list of volume groups managed by this package.
I InParam[0] = Package name
I
OutParam[0:N] = Volume group list
setClusterPackageVolumegroupList
Required Required Required. Sets in the registry, the list of volume groups to be managed for the given package. Required
I
InParam[0] = Package name
I InParam[1:N] = Volume group list
For example:
I setClusterPackageVolumegroupList pkg1 vg1 vg2 vg3
getClusterPackageFailoverPolicy
Gets from the registry, value of the failover policy for this package.
I InParam[0] = Package name
I
OutParam[0] = CONFIGURED_NODE or MIN_PACKAGE_NODE
setClusterPackageFailoverPolicy
Sets in the registry, the failover policy for the given package. The default is
CONFIGURED_NODE.
I
InParam[0] = Package name
I InParam[1] = CONFIGURED_NODE or MIN_PACKAGE_NODE
getClusterPackageFailbackPolicy
Gets from the registry, value of the failback policy for this package.
I InParam[0] = Package name
I OutParam[0] = MANUAL or AUTOMATIC
setClusterPackageFailbackPolicy
Sets in the registry, the failover policy for the given package. The default is MANUAL.
I InParam[0] = Package name
I
InParam[1] = MANUAL or AUTOMATIC