68
Command Reference
getClusterHeartbeatNetworkCardList
Gets the list of network card interfaces used for heartbeats as they are stored in the registry.
I
OutParam[0:N] = Network card interface list
setClusterHeartbeatNetworkCardList
Stores the list in the registry. Is required before calling applyClusterConfiguration
I
InParam[0:N] = List of heartbeat network cards
For example:
I
setClusterHeartbeatNetworkCardList eth0 eth1
getClusterQsPollingInterval
Gets the interval from the registry.
I
OutParam[0] = Interval, in seconds, for contacting the Quorum server
setClusterQsPollingInterval
Stores the polling interval in the registry: how often, in seconds, to contact Quorum server.
I
InParam[0] = Interval, in seconds
getClusterHeartbeatInterval
Gets the interval from the registry.
I
OutParam[0] = Interval, in seconds, for sending heartbeats
setClusterHeartbeatInterval
Stores the interval in the registry.
I
InParam[0] = Interval, in seconds, for sending heartbeats
getClusterNodeTimeout
Gets the timeout from the registry.
I
OutParam[0] = Time period, in seconds, before a node is considered gone from the
cluster
setClusterNodeTimeout
Stores the timeout in the registry: how long to wait, in seconds, before considering a node gone
from the cluster.
I
InParam[0] = Interval
getClusterAutoStartTimeout
Gets the timeout from the registry.
I
OutParam[0] = Time period, in seconds, before timeout occurs
applyClusterConfiguration
applyClusterConfiguration.
applyClusterConfiguration