HP StorageWorks 8000 - NAS Command Reference Manual page 27

removeStorageDasdScsiVa7xxxLun
Deletes the specified LUN from the specified storage array. All data will be lost.
I
inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = LUN number
getStorageDasdScsiVa7xxxLunCapacity
Returns the capacity of the specified LUN on the specified storage array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = LUN number
I
inParam[2] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxLun
Returns the name of the specified LUN on the specified storage array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = LUN number
I outParam[0] = SCSI LUN name
getStorageDasdScsiVa7xxxLunRedundancygroup
Returns the redundancy group of a VA7xxx array LUN. Note the difference between this
command and the very similar getStorageDasdScsiLunRedundancygroup
I inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = LUN number
I outParam[0] = Redundancy group
getStorageDasdScsiLunRedundancygroup
Returns the redundancy group number that this DASD LUN is on. This command should only be
used on LUNs that are on an HP VA7xxx storage array.
I inParam[0] = SCSI LUN name
I outParam[0] = Redundancy group number
getStorageDasdScsiVa7xxxPerformanceLogList
Returns a list of paths to performance log files for a VA7xxx storage array. Returned paths are
relative to the web-server document root directory.
I inParam[0] = SCSI VA7xxx DASD name
I outParam[0:N] = Downloadable performance log file paths
getStorageDasdScsiVa7xxxDeviceLogList
Returns a list of paths to diagnostic log files for a VA7xxx storage array. Returned paths are
relative to the web-server document root directory.
I inParam[0] = SCSI VA7xxx DASD name
I outParam[0:N] = Downloadable diagnostic log file names
getStorageDasdScsiLunRedundancygroup command.
getStorageDasdScsiLunRedundancygroup getStorageDasdScsiLunRedundancygroup
Command Reference 25