When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent e-mail,

s "Reading Problem Mail Notification Function"

Sub Menu

Mail Notification

You can set whether or not (On/Off) to be notified by e-mail.

SMTP Server

You can input the IP addressg for the SMTP server for the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Port Number

You can input the port number for the SMTP server. The default value is 25 You can input numbers between 1 to 65535.

Email Address 1/

You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You can enter up to

Email Address 2/

32 single-byte alphanumeric characters for the e-mail addresses.

Email Address 3

Setting a Notification

You can select the problems or warnings to be notified about by e-mail. When the selected problem or warning occurs in the projector, an e-mail is

Event

sent to the specified "Destination address" notifying that a problem or warning has occurred. You can select multiple items from the displayed items.

p.111

Function

Table of Contents