Restrictions In The Target Projector When Using Multiple Projectors - Epson EB-G5200W User Manual

Restrictions in the Target Projector when Using Multiple Projectors

When an ID is set for the projector and the remote control, you can use the remote control to operate only the projector with a matching ID. This is
very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The default value is "Off", and you can operate with the remote control regardless
of the remote control's ID setting.
You can set an ID for the remote control within a range of "0" to "9". The default value is "0", and you can operate with the remote control
regardless of the projector's ID setting. Also, if there is an ID switch on the side of the remote control, and this switch is set to "Off", you can
operate all projectors by remote control regardless of the ID setting for the projector or the remote control.
Can operate remote control
Projector ID: 1
ID switch: On
Remote control
ID: 1
Example when projector ID Example when projector ID
and remote control ID match, and remote control ID do not
and remote control switch is On match, and remote control
switch is On
Cannot operate remote control
Projector ID: 1
Projector ID: 1
ID switch: On
ID switch: Off
Remote control
Remote control
ID: 3
ID: 3
Example when projector ID
and remote control ID do not
match, and remote control
switch is Off
Can operate remote control Can operate remote control
Projector ID: Off
ID switch: On
Remote control
ID: 1
Example when projector ID is
Off
29
Can operate remote control
Projector ID: 1
ID switch: On
Remote control
ID: 0
Example when remote control
ID is 0, and ID switch is On