Restricting Operation (Control Panel Lock); Entering The Password - Epson EB-G5200W User Manual

Security Functions

Entering the Password

f
When the password entry screen is displayed, enter the password using the
numeric buttons on the remote control.
Procedure
While holding down the [Num] button, enter the password
by pressing the numeric buttons.
When you enter the correct password, projection begins.
Attention
• If an incorrect password is entered three times in succession, the
message "The projector's operation will be locked." is displayed
for about five minutes, and then the projector switches to standby
mode. If this happens, disconnect the power plug from the
electrical outlet and then reinsert it and turn the projector's power
back on. The projector displays the password entry screen again
so that you can enter the correct password.
• If you have forgotten the password, make a note of the "Request
Code: xxxxx" number that appears on the screen and contact the
nearest address provided in the Support and Service Guide.
Epson Projector Contact List
s
• If you continue to repeat the above operation and input the wrong
password thirty times in succession, the following message is
displayed and the projector does not accept any more password
entries. The projector's operation will be locked. Contact Epson as
described in your documentation. s Epson Projector Contact List

Restricting Operation (Control Panel Lock)

Do one of the following to lock the operation buttons on the control panel.
• Full lock
All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.
• Partial lock
All of the buttons on the control panel, except for the
locked.
This is useful at events or shows when you want to deactivate all buttons
and only project, or at schools when you want to limit button operation.
The projector can still be operated using the remote control.
Procedure
A
During projection, press the [Menu] button and
select "Settings" - "Control Panel Lock" from the
configuration menu. s "Using the Configuration
Menu" p.40
Using the remote control
36
[ ]
button, are
t
Using the control panel