Epson EB-G5950 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-G5950
  6. User manual

Epson EB-G5950 User Manual

Epson multimedia projector user's guide
Hide thumbs Also See for EB-G5950:
Table of Contents

Advertisement

Quick Links

See also: Manual
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-G5950

Summary of Contents for Epson EB-G5950

  • Page 1 User’s Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

  • Page 3: Table Of Contents

    EB-G5950/G5650W ........
  • Page 4 Cleaning ..........101 Network Menu (EB-G5950/G5650W) ......67 Cleaning the Projector's Surface .
  • Page 5 About PJLink ..........118 Installing the Wireless LAN Unit (ELPAP03) (EB-G5950/G5650W only) ..143 About Crestron RoomView®...
  • Page 6 Screen Size and Projection Distance ......149 Projection Distance of EB-G5950/G5900/G5800/G5600/G5500 ....149 Projection Distance of EB-G5650W .

  • Page 7: Introduction

    Introduction This chapter explains the projector's features and the part names.

  • Page 8: Projector Features

    The split screen function is supported by p.22 EB-G5950/G5900/G5650W/G5600. Five optional lenses are provided You can select the best lens according to the projection distance and purpose. The bayonet type allows you to simply and easily exchange and install the optional lenses.

  • Page 9: Easy To Handle

    Windows computers.) s p.147 Monitoring and Control Functions A selection of monitoring and control protocols is supported, such as the Epson EasyMP Monitor application software. This allows you to use the projector according to your system environment. "Monitoring and Controls"...

  • Page 10: Part Names And Functions

    Front/Top Air exhaust vent Exhaust vent for air used to cool the projector internally. EB-G5950/G5650W with the standard lens is shown in the illustration. Caution From here on, all features will be explained using illustrations of EB- G5950/G5650W with a standard lens unless otherwise specified.

  • Page 11: Base

    Part Names and Functions Name Function Name Function Vertical lens shift dial Turn the dial to move the position of the projected image Screw holes to fix the Holes for screws to fix the cable cover in place. up or down. s p.22 cable cover p.144...

  • Page 12: Rear

    EB-G5950/G5650W Name Function Wireless LAN unit Install the Wireless LAN unit here. Remove the cover installation section when installing. s "Installing the Wireless LAN Unit (EB-G5950/G5650W (ELPAP03) (EB-G5950/G5650W only)" p.143 only) s "Control Panel" p.15 Control Panel s "Interface" p.12...

  • Page 13: Eb-G5900/G5600

    Part Names and Functions Name Function Name Function RS-232C port When controlling the projector from a computer, connect Computer2 input port For analog RGB signals from a computer and component it to the computer with an RS-232C cable. This port is for video signals from other video sources.

  • Page 14: Eb-G5800/G5500

    Part Names and Functions EB-G5800/G5500 Name Function Audio3 input port Connects to the audio out port of the device that is connected to the BNC input port. Connects to the audio out port of the device that is Audio1 input port connected to the Computer1 input port.

  • Page 15: Control Panel

    When projecting using PC Free or Connect to a Network Projector, these buttons function only as [ ] and [ buttons. (EB-G5950/G5650W) [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s p.85...

  • Page 16: Remote Control

    Guide Each time the button is pressed, the image displayed [Comp1/2] button changes between the Computer1 input port and Computer2 input port. (EB-G5950/G5900/G5650W/ G5600) Changes to images from the Computer1 input port. (EB- G5800/G5500) Changes to images from the BNC input port.
  • Page 17 These buttons can be used to page up and down when Caution using the optional wireless mouse receiver. Do not start when the volume is set too high. Turns the video and audio on or off. (EB-G5950/G5900/ [A/V Mute] button Loud sounds may cause loss of hearing. Always low- G5650W/G5600) er the volume before turning off the projector.

  • Page 18: Installing The Batteries

    While pushing the battery compartment cover catch, lift the cover the projector through the network and the image from the USB device that is connected to the USB(TypeA) port. (EB-G5950/G5650W only) This button does not function when using EB-G5900/ G5800/G5600/G5500.

  • Page 19: Operating Range Of Remote Control

    • To restrict reception of the operation signals from the remote control, set the Remote Receiver on the Set menu. s p.59 • When using a remote control provided with other Epson projectors, set the Remote Control Type on the Extended menu. s p.61 The operating range will depend on the remote control that you use.

  • Page 20: Useful Functions

    Useful Functions This chapter explains useful tips for giving presentations, and the security functions.

  • Page 21: Adjusting The Projected Image

    Adjusting the Projected Image Press the [ ] button on the remote control in the [ ] direction Displaying a Test Pattern or press the [Enter] button on the control panel to switch the test pattern. A test pattern can be displayed to adjust the projection status without To display the previous image, press the [ ] button on the remote connecting video equipment.

  • Page 22: Adjusting The Position Of The Projected Image (Lens Shift)

    The ranges within which the image can be moved using the lens shift dials Press the [Esc] button to end the test pattern. are shown below. EB-G5950/G5900/G5800/G5600/ EB-G5650W G5500 Adjusting the Position of the Projected Image (Lens Shift)

  • Page 23: Quick Corner

    Adjusting the Projected Image • Quick Corner Quick Corner This allows you to manually correct each of the four corners of the projected image separately. "Quick Corner" p.23 Procedure We recommend using Quick Corner to accurately adjust keystone distortion. Press the [Menu] button while the projector is projecting. •...
  • Page 24 Adjusting the Projected Image Correct the position of the corner using the [ ] button on the remote control, or the [ ], [ ], [ / ] and [ < > buttons on the control panel. If the triangle in the direction you are adjusting the shape turns gray, as shown in the screenshot below, you cannot adjust the shape any further in that direction.

  • Page 25: H/V-Keystone

    Adjusting the Projected Image When you are done, press the [Esc] button to exit the This adjustment can also be made from H/V-Keystone on the Settings correction menu. menu. s p.59 Because the correction method was changed to Quick Corner from Keystone in the configuration menu, when [ ], [ ], [...
  • Page 26 Adjusting the Projected Image • Correcting horizontal keystone Shift the lens to the position shown below when performing horizontal Horizontal keystone can be corrected to a horizontal projector tilt of up and vertical keystone. When the lens shift is not positioned as below, to 20˚.

  • Page 27: Changing The Projected Image

    Changing the Projected Image You can change the projected image in the following two ways. When the [Source Search] button is pressed, a search is made for input ports to which video signals are being input in the following order. (The •...

  • Page 28: Switch To The Target Image By Remote Control

    Changing the Projected Image When switching to LAN, images from computers connected through the network are projected. (EB-G5950/G5650W only) The following screen showing the status of image signals remains displayed when only the image that the projector is currently displaying is available, or when no image signal can be found. You can select the input port where the equipment you want to use is connected.

  • Page 29: Changing The Aspect Ratio Of The Projected Image

    Parts that can be set depend on the type of image that is being projected. extend beyond the projection size are not projected. EB-G5950/G5900/G5800/G5600/G5500 Projects at the resolution of the input image size to the Native center of the screen.

  • Page 30: Changing The Aspect Mode (Eb-G5950/G5900/G5800/G5600/G5500)

    1024X768(4:3) 1280X800(16:10) 1280X1024(5:4) 16:9 Normal Projecting images from the HDMI input port (EB-G5950/G5900/ G5600 only) Each time the [Aspect] button on the remote control is pressed, the aspect mode changes in the order Auto, 4:3, 16:9, and Native. p.29 Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)

  • Page 31: Changing The Aspect Mode (Eb-G5650W)

    Changing the Aspect Ratio of the Projected Image Aspect mode Input Signal WXGA SXGA 1024X768(4:3) 1280X800(16:10) 1280X1024(5:4) 16:9 Native Auto If parts of the image are missing or it cannot project everything, set 16:9 Wide or Normal in Resolution from the configuration menu Full depending on the size of the computer panel.
  • Page 32 Changing the Aspect Ratio of the Projected Image Projection examples for each aspect mode are shown below. Aspect mode Input Signal WXGA SXGA 1024X768(4:3) 1280X800(16:10) 1280X1024(5:4) Normal 16:9 Full Zoom Native If parts of the image are missing or it cannot project everything, set Wide or Normal in Resolution from the configuration menu depending on the size of the computer panel.

  • Page 33: Selecting The Projection Quality (Selecting Color Mode)

    The projector is not a medical device and cannot be used for medical diagnosis. *1 This can be selected when inputting RGB signals. When using EB-G5950/ G5650W, this can be selected when inputting RGB signals, or when USB or LAN is selected as the input source.

  • Page 34: Projecting Two Images Simultaneously (Split Screen) (Eb-G5950/G5900/G5650W/G5600 Only)

    Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only) A split screen can be used to divide the screen into a left screen ( ) and a Operating Procedures right screen ( ) and simultaneously project two images. Projecting on a split screen...

  • Page 35: Switching The Left And Right Screens

    Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only) Select "Swap Screens" and then press the [Enter] button. The Split Screen Setup will also be displayed when the [Source The images on the left and right screens will be swapped. Search] button is pressed on the remote control or control panel or when a Source button is pressed on the remote control.

  • Page 36: Ending The Split Screen

    Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only) The projected images will appear as shown below after setting the screen Ending the split screen size. Equal Larger Left Procedure To end the split screen, press the [Esc] button on the remote control or control panel.

  • Page 37: Restriction Relating To Images

    Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only) Restriction relating to images • The default values for the Image menu are applied to the image on the right screen. However, the settings for the image projected on the left screen are applied to the image on the right screen for the Color Mode, Abs.

  • Page 38: Functions For Enhancing Projection

    Functions for Enhancing Projection • If you use this function when projecting moving images, the images Hiding the Image and Sound Temporarily (A/V and sound continue to be played back by the source, and you Mute) cannot return to the point where A/V Mute was activated. •...

  • Page 39: Pointer Function (Pointer)

    Functions for Enhancing Projection • Audio does not stop. Procedure • The image source continues to play back the moving images even while Freeze is on, and so it is not possible to resume projection Display the Pointer. from the point where it was paused. Remote Control •...

  • Page 40: Enlarging Part Of The Image (E-Zoom)

    Functions for Enhancing Projection Move the Pointer icon ( Procedure Remote Control Start E-Zoom. Remote Control You can choose from three different kinds of Pointer icon ( ) in Settings - Pointer Shape from the configuration menu. Move the ( ) to the area of the image that you want to p.59 enlarge.
  • Page 41 Functions for Enhancing Projection Enlarge. Remote Control Each time the button is pressed, the area is expanded. You can expand quickly by holding the button down. You can reduce the enlarged image by pressing the [ ] button. Press the [Esc] button to cancel. •...

  • Page 42: Limitation Of The Number Of The Target Projectors When Using Multiple Projectors

    Limitation of the Number of the Target Projectors when Using Multiple Projectors When an ID is set for the projector and the remote control, you can use the remote control to operate only the projector with a matching ID. This is very useful when managing multiple projectors.

  • Page 43: Setting The Remote Control Id

    Limitation of the Number of the Target Projectors when Using Multiple Projectors Procedure Setting the Remote Control ID Set the remote control ID switch to On. Procedure Set the remote control ID switch to On. During projection, while holding the [ID] button, press the [Help] button.
  • Page 44 Limitation of the Number of the Target Projectors when Using Multiple Projectors The remote control ID setting is saved in the remote control. Even if the remote control batteries are removed to replace them and so on, the stored ID setting is retained. However, if the batteries are left out for a long time, it is reset to the default value (ID0).

  • Page 45: Color Correction When Projecting From Multiple Projectors (Multi-Screen Color Adjustment)

    Color Correction when Projecting from Multiple Projectors (Multi-screen Color Adjustment) When multiple projectors are lined up and projecting images, you can Correction Method manually correct the brightness and color tone of each projector's image so that the colors projected from each projector match closely. After setting up the projectors, correct the brightness and tone for each projector to reduce the differences.
  • Page 46 Color Correction when Projecting from Multiple Projectors (Multi-screen Color Adjustment) • Each time a level is selected, the pattern of the level selected is displayed. • You can start correcting from any level, usually you can make it darker or lighter by correcting 1 to 5 or 5 to 1. Correct the brightness with "Brightness Correct.".

  • Page 47: Saving A User's Logo

    Saving a User's Logo You can save the image that is currently being projected as a User's Logo. The saved user's logo can be used as the display image when there is no video signal input or during the A/V Mute operation. Once a User's Logo has been saved, the logo cannot be returned to the factory default.
  • Page 48 Saving a User's Logo Move the box to select the part of the image to use as the You can save at up to 400 ^ 300 dots in size. User's Logo. When "Select this image?" is displayed, select "Yes". Select the zoom factor from the zoom setting screen.

  • Page 49: Security Functions

    Security Functions The projector has the following enhanced security functions. 2. User's Logo Protect Even if someone tries to change the User's Logo set by the owner of the projector, it • Password Protect cannot be changed. When User's Logo Protect is set to On, the following setting You can limit who can use the projector.

  • Page 50: Entering The Password

    Security Functions Remote Control • If Password Protect is already activated, you must enter the Password. If the Password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.50 • When the Password is set, stick the Password protect sticker in a visible position on the projector as a further theft deterrent.

  • Page 51: Restricting Operation (Control Panel Lock)

    If you continue to repeat the above operation and input the wrong Password thirty times in succession, the following message is displayed and the projector does not accept any more Password entries. "The projector's operation will be locked." Contact Epson as described in your documentation. Epson Projector Contact List...

  • Page 52: Anti-Theft Lock

    Security Functions You can release the control panel lock by one of the following two methods. • From the remote control, select Off in Settings - Control Panel Lock from the configuration menu. s p.59 • Hold down the [Enter] button on the Control panel for about seven seconds, a message is displayed and the lock is released.

  • Page 53: Configuration Menu

    Configuration Menu This chapter explains how to use the configuration menu and its functions.

  • Page 54: Using The Configuration Menu

    Using the Configuration Menu Selecting from the top menu Selecting from the sub menu Setting Each Item Exit...

  • Page 55: Image Menu

    RGB Signal/USB /LAN Component Video Signal Composite video Signal /S-Video Signal *EB-G5950/G5650W only Sub Menu Function Color Mode You can select the quality of the image to suit your surroundings. s p.33 You can adjust the image Brightness.
  • Page 56 Image Menu Sub Menu Function Abs. Color Temp. You can adjust the overall tint of the image in 10 stages from 5000 K to 10000 K. When a high value is selected the image becomes tinged with blue, when a low value is selected the image becomes tinged with red. You can make adjustments by choosing one of the following.

  • Page 57: Signal Menu

    Items that can be set vary depending on the image signal or input source currently being projected as shown in the following screen shots. Setting details are saved for each image signal. You cannot make settings in the Signal menu when the input source is USB or LAN. (EB-G5950/G5650W) RGB Signal...
  • Page 58 Signal Menu Sub Menu Function HDMI Video Range If the range is set to Auto , the video level of the input signal will be automatically determined, for example, when the HDMI input port is connected to a DVD player. If the range is set to Auto and the image shows whiteout or blackout, set the video level according to the video level setting of the DVD player.

  • Page 59: Settings Menu

    Audio Input LAN Audio Input (EB-G5950/G5650W only): When the image from a computer that is connected through the network is being projected, audio is output from the projector using the port that is set here. When transferring audio from the computer to the projector to output it, select LAN.
  • Page 60 Settings Menu Sub Menu Function Remote Receiver You can limit the reception of the operation signal from the remote control. When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it, you can make settings to deactivate the remote receiver you do not want to use or that is experiencing interference.

  • Page 61: Extended Menu

    Extended Menu Sub Menu Function You can make settings related to the projector's display. Display Messages: The following messages are not displayed on the screen when this item is set to Off. Overheating and other warnings, messages such as when there is no video input, and when Freeze is On or when changing Source, Color Mode or Aspect.
  • Page 62 Set this item to Normal to use the remote control provided with the projector. When Simple is selected, you can use the remote control provided with other Epson projectors to operate this projector. This is useful if you want to use a remote control that you are already familiar with to operate the projector.
  • Page 63 Extended Menu Sub Menu Function Reset You can reset Display , Operation , and Air Filter Notice from the Extended menu to their default settings. To return all menu items to their default settings, see s p.83 *1 When User's Logo Protect is set to On in Password Protect, settings relating to the user's logo cannot be changed. You can make changes after setting User's Logo Protect to Off.

  • Page 64: Network Menu (Eb-G5900/G5800/G5600/G5500)

    Network Menu (EB-G5900/G5800/G5600/G5500) When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting Network Protect to Off. p.49 Sub Menu Function Wired LAN You can make network settings. DHCP: You can set whether or not (On/Off) to use DHCP.
  • Page 65 Network Menu (EB-G5900/G5800/G5600/G5500) Sub Menu Function SNMP Set this parameter to On when using SNMP to monitor the projector. To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network expert.
  • Page 66 Network Menu (EB-G5900/G5800/G5600/G5500) Each time the [CAPS] key is selected and the [Enter] button is pressed, it switches between uppercase and lowercase letters. Each time the [SYM1/2] key is selected and the [Enter] button is pressed, it switches the symbol keys in the section enclosed in the box.

  • Page 67: Network Menu (Eb-G5950/G5650W)

    Network Menu (EB-G5950/G5650W) When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting Network Protect to Off. p.49 Sub Menu Function Displays the network settings.

  • Page 68: Notes On Operating The Network Menu

    Network Menu (EB-G5950/G5650W) Notes on Operating the Network Menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu. When done, make sure you go to the Setup complete, and select one of Yes, No, or Cancel.

  • Page 69: Basic Menu

    Network Menu (EB-G5950/G5650W) Basic Menu Sub Menu Function Projector Name Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanumeric characters. PJLink Password Set a password to use when you access the projector using compatible PJLink software. s p.118...

  • Page 70: Wireless Lan Menu

    Network Menu (EB-G5950/G5650W) Wireless LAN Menu To connect the projector to a computer using a wireless LAN, install the Wireless LAN unit (ELPAP03). p.143 Sub Menu Function Set this parameter to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a wireless LAN, set this Wireless LAN Power parameter to Off to prevent unauthorized access by others.
  • Page 71 Network Menu (EB-G5950/G5650W) Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCP If this is set to On you cannot set any more addresses. You can input the IP address assigned to the projector. IP Address You can input a number from 0 to 255 in each field of the address.

  • Page 72: Security Menu (Only Available When The Wireless Lan Unit Is Installed)

    Network Menu (EB-G5950/G5650W) Security Menu (Only available when the Wireless LAN unit is installed) When the Wireless LAN unit is installed and being used in Advanced mode, it is strongly recommended that you set security. Sub Menu Function You can select one type of security.

  • Page 73: When Wep Is Selected

    Network Menu (EB-G5950/G5650W) When WEP is selected Sub Menu Function You can set the encryption for WEP encoding. WEP Encryption 128 Bit: Uses 128 (104) bit encoding 64 Bit: Uses 64 (40) bit encoding Format You can set the input method for the WEP encrypted key.
  • Page 74 Network Menu (EB-G5950/G5650W) Sub Menu Function You can set Authentication Type for WEP encoding. Authentication Type Open: Method to connect access point with no authentication. Shared: Authentication Type using WEP key.

  • Page 75: When Wpa-Psk(Tkip/Aes) Or Wpa2-Psk(Tkip/Aes) Is Selected

    Network Menu (EB-G5950/G5650W) When WPA-PSK(TKIP/AES) or WPA2-PSK(TKIP/AES) is selected Sub Menu Function You can enter a Pre-Shared Key (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the Pre-Shared PSK (Encryption key) Key is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*).

  • Page 76: When Eap-Tls Is Selected

    Network Menu (EB-G5950/G5650W) When EAP-TLS is selected Refer to the following information to register a digital certificate to the projector for authentication. PC Free Operation Guide "Registering a Digital Certificate to the Projector" Sub Menu Function Issued to/Issued by/Validity Information in the certificate is displayed. You cannot enter.

  • Page 77: Eap-Ttls/Md5, Eap-Ttls/Ms-Chapv2, Peap/Ms-Chapv2, Peap/Gtc, Leap, Eap-Fast/Ms-Chapv2, Eap-Fast/Gtc Is Selected

    Network Menu (EB-G5950/G5650W) EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2, PEAP/MS-CHAPv2, PEAP/GTC, LEAP, EAP-Fast/MS-CHAPv2, EAP-Fast/GTC is selected Sub Menu Function You can enter a user name to be used for authentication in single-byte alphanumeric characters (no spaces). You can enter up to 64 characters. User name You cannot enter more than 32 characters on the configuration menu.

  • Page 78: Wired Lan Menu

    Network Menu (EB-G5950/G5650W) Wired LAN Menu Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCP If this is set to On you cannot set any more addresses. IP Address You can input the IP address assigned to the projector.

  • Page 79: Mail Menu

    Network Menu (EB-G5950/G5650W) Mail Menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. "Reading Problem Mail Notification Function" p.114 Sub Menu Function You can set whether or not (On/Off) to be notified by e-mail.

  • Page 80: Others Menu

    Set this parameter to On only when using Crestron RoomView to monitor and control the projector over a network. Normally, leave this parameter set RoomView to Off. s "About Crestron RoomView® (EB-G5950/G5650W only)" p.119 Changes in projector settings take effect upon restarting.

  • Page 81: Reset Menu

    Network Menu (EB-G5950/G5650W) Reset Menu Resets all of the network settings. Sub Menu Function To reset all of the network settings, select Yes. Reset network settings. After you reset all the settings, the Basic menu appears.

  • Page 82: Info Menu (Display Only)

    RGB Signal/Component Video Signal Composite video Signal/S-Video Signal /LAN *EB-G5950/G5650W only Sub Menu Function You can display the cumulative lamp operating time Lamp Hours When it reaches the lamp warning time, the characters are displayed in yellow. You can display the Source name for the connected equipment currently being projected.

  • Page 83: Reset Menu

    Reset Menu Sub Menu Function You can reset all items in the configuration menu to their default settings. Reset All The following items are not reset to their defaults: Items for Password, Input Signal, User's Logo, Multi-screen, all items for Network menus, Lamp Hours, and Language.

  • Page 84: Troubleshooting

    Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.

  • Page 85: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the [Help] button. You can solve problems by answering the questions. Procedure Press the [Help] button. Using the Remote Control Using the Control panel The Help screen is displayed.
  • Page 86 Using the Help Confirm the selection. Using the Remote Control Using the Control panel Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit Help. If the Help screen does not provide a solution to the problem, refer to "Problem Solving"...

  • Page 87: Problem Solving

    Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing. [t] button does not function during warm-up. Projecting Indicates the operating status of wireless LAN when the Wireless LAN unit is installed. (EB-G5950/G5650W only) s "Reading the wireless LAN indicators" p.143...

  • Page 88: Indicator Is Lit Or Flashing Red

    Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List Fan Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.

  • Page 89: M O Indicator Is Flashing Or Lit

    Support and Service Guide. s Epson Projector Contact List If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to avoid pieces of broken glass (you cannot continue projecting until the lamp is replaced).
  • Page 90 • If the error is not indicated in this table, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List...

  • Page 91: When The Indicators Provide No Help

    Problem Solving Other problems When the Indicators Provide No Help • "No sound can be heard or the sound is faint (EB-G5950/G5900/G5650W/G5600 If any of the following problems occur and the indicators do not offer a only)" p.97 solution, refer to the pages given for each problem.

  • Page 92: Problems Relating To Images

    Problem Solving Problems relating to images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly.

  • Page 93: The Message "Not Supported" Is Displayed

    Problem Solving The message "Not supported" is displayed. Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.57 Only when projecting images from a video source Do the image signal Resolution and the Refresh Rate correspond to Refer to the computer's documentation for how to change the image signal Resolution and the Refresh Rate output from the mode?

  • Page 94: Interference Or Distortion Appear In Images" S

    Problem Solving Check Remedy Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the projector up in the room about one hour before it is used.

  • Page 95: Image Colors Are Not Right

    Problem Solving Check Remedy Is Position adjusted correctly? Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic adjustment when projecting the computer analog RGB signals. If the images are not adjusted correctly after using automatic adjustment, you can make the adjustments using Position from the configuration menu.

  • Page 96: Problems When Projection Starts

    Support and Service Guide. s Epson Projector Contact List Is the Control Panel Lock set to Full Lock? Press the [t] button on the remote control.

  • Page 97: Other Problems

    Problem Solving Other problems No sound can be heard or the sound is faint (EB-G5950/G5900/G5650W/G5600 only) Check Remedy Is the audio source connected correctly? Disconnect the cable from the audio input port, and then reconnect the cable. Is the volume adjusted to the minimum setting? Adjust the volume so that sound can be heard.

  • Page 98: Nothing Appears On The External Monitor (Eb-G5950/G5900/G5650W/G5600 Only)" S

    Problem Solving Nothing appears on the external monitor (EB-G5950/G5900/G5650W/G5600 only) Check Remedy Are you trying to display an image from an input port other Only RGB signals from one of the following input ports can be displayed on an external monitor: Computer1...

  • Page 99: Interpreting Event Ids (Eb-G5950/G5650W Only)

    Problem Solving Interpreting Event IDs (EB-G5950/G5650W only) Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following contact addresses. Epson Projector Contact List Event ID...

  • Page 100: Maintenance

    Maintenance This chapter explains the maintenance methods that are required to ensure a long projector service life.

  • Page 101: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Cleaning the Air Filter projected images starts to deteriorate. If one of the following messages is displayed or the temperature indicator Warning flashes green, clean the air filter. Time to clean the air filter.
  • Page 102 Cleaning Attention Remove the air filter. If the air filter is hit too hard, it may become unusable due to deformities and Remove the air filter by placing your finger into the groove as shown cracks. in the following illustration. Remove any dust remaining on the air filter by using a vacuum cleaner from the front side.
  • Page 103 Cleaning Replace the air filter cover. Press until it clicks into place. If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s p.107...

  • Page 104: Replacing Consumables

    Replacing Consumables Replacing the Lamp Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images. Lamp replacement period When using Power Consumption continually at Normal: About 1900 hours It is time to replace the lamp when: When using Power Consumption continually at ECO: About 2900 hours •...
  • Page 105 If the lamp is cracked, replace it with a new lamp, or contact your prevent it from falling, it should never fall even when replacing the local dealer for further advice. Epson Projector Contact List lamp in a projector installed on the ceiling.
  • Page 106 Replacing Consumables Replace the lamp cover. Install the new lamp. Insert the lamp along the guide rail in the correct direction so that it fits in place and press it firmly to the back. Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution.

  • Page 107: Resetting The Lamp Hours

    Replacing Consumables Resetting the Lamp Hours The projector records how long the lamp is turned on and a message and indicator notify you when it is time to replace the lamp. After replacing the lamp, make sure you reset the lamp hours from the Reset Menu. p.83 Only reset the lamp operating time after the lamp has been replaced.
  • Page 108 Replacing Consumables Press until it clicks into place. Dispose of used air filters properly in accordance with your local regulations. Material quality of the frame section: Polypropylene Material quality of the filter section: Polypropylene...

  • Page 109: Notes On Transportation

    Notes on Transportation There are many glass parts and precision components inside the projector. To prevent damage due to impacts when transporting, handle the projector as follows. Moving Nearby Checking the following points, and then carry carefully by the handles. •...

  • Page 110: Monitoring And Controls

    Monitoring and Controls This chapter explains the functions that can be used to monitor and control the projector.

  • Page 111: Easymp Monitor

    • Mail Notification settings EasyMP Monitor lets you carry out operations such as checking the statuses of multiple Epson projectors that are connected to a network at a computer You can set e-mail addresses to which notifications are sent if a status monitor, and controlling the projectors from the computer.

  • Page 112: Changing Settings Using A Web Browser (Web Control)

    • Use the Advanced mode when connecting with a wireless LAN. Procedure (EB-G5950/G5650W) s p.70 • Setup and control with a Web browser are possible if Standby Mode is set to Communication On from the Extended menu of the Start the Web browser on the computer.
  • Page 113 Changing Settings Using a Web Browser (Web Control) Name Function [BNC] button The input source will change to BNC. The input source will change to HDMI. (EB-G5950/ [DVI-D/HDMI] button G5900/G5650W/G5600 only) Images are paused or unpaused. s p.38 [Freeze] button [A/V Mute] button Temporarily turns the audio and video on or off.

  • Page 114: Using The Mail Notification Function To Report Problems

    (-): A projector problem has been dealt with occurs in the projector, the following e-mail is sent. Subject: EPSON Projector Line 1: The name of the projector where the problem has occurred Line 2: The IP address set for the projector where the problem has occurred.

  • Page 115: Management Using Snmp

    • To use the SNMP function to monitor the projector, you need to install the SNMP manager program on your computer. • The managing function using SNMP cannot be used via Wireless LAN in Quick Connection Mode. (EB-G5950/G5650W) • Up to two destination IP addresses can be saved.

  • Page 116: Esc/Vp21 Commands

    ESC/VP21 Commands • Parity: None Serial Connection • Stop-bit: 1 bit • Flow control: None • Connector shape: D-Sub 9-pin (male) • Projector input port name: RS-232C Command List <At the projector> <At the computer> When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode.
  • Page 117 A/V Mute On/Off MUTE ON MUTE OFF A/V Mute selection Black MSEL 00 Blue MSEL 01 User's Logo MSEL 02 *1 EB-G5950/G5900/G5650W/G5600 only *2 EB-G5950/G5650W only Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit.

  • Page 118: About Pjlink

    • Input names defined by PJLink and corresponding projector sources Source PJLink Command Computer1 INPT 11 Computer2 INPT 12 INPT 13 Video1 INPT 23 Video2 INPT 21 S-Video INPT 22 HDMI INPT 32 INPT 41 INPT 52 *1 EB-G5950/G5900/G5650W/G5600 only *2 EB-G5950/G5650W only...

  • Page 119: About Crestron Roomview® (Eb-G5950/G5650W Only)

    About Crestron RoomView ® (EB-G5950/G5650W only) ® Crestron RoomView is an integrated control system provided by • Only single-byte alphanumeric characters and symbols can be ® Creston . It can be used to monitor and control multiple devices connected entered.

  • Page 120: Using The Operation Window

    About Crestron RoomView® (EB-G5950/G5650W only) Using the operation window Button Function Freeze Images are paused or unpaused. s p.38 Contrast Adjusts the difference between light and shade in the images. Brightness Adjusts the image brightness. Color Adjusts the color saturation for the images.

  • Page 121: Using The Tools Window

    About Crestron RoomView® (EB-G5950/G5650W only) Function Contact IT Help Displays the Help Desk window. Used to send and receive messages to the administrator using Crestron ® RoomView Express. Info Displays information on the projector that is currently connected. Tools Changes the settings in the projector that is currently connected.
  • Page 122 About Crestron RoomView® (EB-G5950/G5650W only) Item Function Item Function DHCP Select the Enabled check box to use DHCP. The New Password Enter the new password when changing the password to following address cannot be set if DHCP is enabled. open the operation window. (The password can contain up to 26 single-byte alphanumeric characters.)

  • Page 123: Network Functions (Eb-G5950/G5650W Only)

    Network Functions (EB-G5950/G5650W Only) This chapter explains the additional functions for networks.

  • Page 124: Projecting With "Connect To A Network Projector

    Projecting with "Connect to a Network Projector" (EB-G5950/G5650W Only) "Connect to a Network Projector" is a standard function in Windows Vista On the computer, start Windows, and then click "Start" - "All and Windows 7. You can project images from the computer by detecting programs"...

  • Page 125: Making A Wps (Wi-Fi Protected Setup) Connection With A Wireless Lan Access Point (Eb-G5950/G5650W Only)

    Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only) There are two methods for setting WPS • Push Button Method SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment.

  • Page 126: Making A Connection Using The Push Button Method

    Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only) When connecting using the Push Button Method, follow the steps The Push Button Method screen is displayed. given below. Press the [Enter] button on the projector's control panel when Go to "Making a connection using the PIN Code Method"...

  • Page 127: Making A Connection Using The Pin Code Method

    Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only) This completes the setup. This completes the setup of the connection between the projector and the access point. Press the [Menu] button to close the configuration menu.
  • Page 128 Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only) The PIN Code Method screen is displayed. The message "Setup by Wi-Fi Protected Setup complete." is displayed. Press the [Enter] button or the [Esc] button.
  • Page 129 Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only) This completes the setup of the connection between the projector and the access point. Press the [Menu] button to close the configuration menu.

  • Page 130: Installation And Connections

    Installation and Connections This chapter explains the projection installation methods and methods to connect to other equipment.

  • Page 131: Installation Methods

    This may result in injury or accidents. Contact your dealer or the nearest address provided in the Support and Service Guide if you want to use this installation method. Epson Projector Contact List • If you use adhesives on the Ceiling mount fixing points to prevent the screws •...
  • Page 132 Installation Methods Each time this button is pressed for at least 5 seconds, the Projection setting will switch between Front and Front/Ceiling. The orientation of the projected image will change accordingly. To set Rear or Rear/Ceiling, use the Projection setting on the Configuration menu.

  • Page 133: Connecting To Video Equipment

    The computer port and cable names may also be different from those given. The EB-G5800/G5500 does not support inputting or outputting audio. Refer to the following when projecting images from a computer that is connected through a network. (EB-G5950/G5650W only)
  • Page 134 Connecting to Video Equipment Computer port Connecting cable Projector port Connection 2 Monitor Out port Computer cable (supplied) Computer1 input port Audio1 input port Audio Out port Audio cable (commercially available) Connection 3 Monitor Out port Computer cable (supplied) Computer2 input port Audio2 input port Audio Out port Audio cable (commercially available)

  • Page 135: Changing The Video Output From A Laptop Computer

    Connecting to Video Equipment Computer port Connecting cable Projector port Connection 5 DVI-D output DVI/HDMI conversion cable (commercially available) HDMI input port Audio1 input port/Audio2 input port/Audio3 input port Audio Out port Audio cable (commercially available) * It does not matter if you connect to the Audio1 input port, Audio2 input port, or Audio3 input port. Set the HDMI Audio Input setting on the Settings menu to the port to which the audio cable is connected.
  • Page 136 Connecting to Video Equipment The video equipment port and cable names may also be different from those given. The EB-G5800/G5500 does not support inputting or outputting audio. Port on the video equipment Connecting cable Projector port Connection 1 Component outputs RCA component video cable (commercially available) + BNC/RCA BNC input port (R/Cr/Pr, G/Y, B/Cb/Pb) adapter (commercially available)
  • Page 137 Connecting to Video Equipment Port on the video equipment Connecting cable Projector port Connection 4 S-Video output S-Video cable (commercially available) S-Video input port Audio4 input port Audio Out port Audio cable (commercially available) Connection 5 Video output Video cable (commercially available) Video2 input port Audio4 input port Audio Out port...
  • Page 138 Connecting to Video Equipment Port on the video equipment Connecting cable Projector port Connection 7 HDMI output HDMI cable (commercially available) HDMI input port • Set the input signal and video signal on the Signal menu according to the signal from the connected equipment. s p.57 •...

  • Page 139: Connecting To External Equipment

    • The image is not displayed on the external monitor when the projector is on standby. Connecting to an external monitor (EB-G5950/ G5900/G5650W/G5600 only) Connecting to External Speakers (EB-G5950/ You can display computer images input from a computer on an external monitor connected to the projector and the screen at the same time.
  • Page 140 Connecting to External Equipment available audio cable (pin plug 3.5 mm stereo mini plug and so on). Use an audio cable compatible with the connector on the external speakers. Connected equip- Connecting cable Projector port ment Audio device Audio cable (commercially Audio Out port available) •...

  • Page 141: Installing Optional And Supplied Accessories

    Installing Optional and Supplied Accessories Removing and Attaching the Projector Lens Unit Removing Attention • Only remove the lens unit when necessary. If dust or dirt enter the projector, projection quality deteriorates and it could cause a malfunction. • Try not to touch the lens section with your hand or fingers. If fingerprints or oils are left on the surface of the lens, projection quality deteriorates.

  • Page 142: Attaching

    Installing Optional and Supplied Accessories Attaching Attention Do not attach the lens unit when the projector's lens insertion section is facing up. Dust or dirt could enter the projector. Procedure Turn clockwise until the focus ring stops moving. Check that the lens cannot be detached by turning it anti- clockwise.

  • Page 143: Installing The Wireless Lan Unit (Elpap03) (Eb-G5950/G5650W Only)

    Installing Optional and Supplied Accessories Secure the Wireless LAN unit using the supplied screw to avoid Installing the Wireless LAN Unit (ELPAP03) (EB- losing the unit. G5950/G5650W only) Attaching Procedure Remove the cover from the Wireless LAN unit installation section on the projector. Store the cover so that it is not lost. Screw hole to fix Wireless LAN unit When connecting a projector to which the Wireless LAN unit is mounted to a computer using a wireless LAN, set the Wireless LAN Power setting...

  • Page 144: Attaching And Removing The Cable Cover

    Installing Optional and Supplied Accessories : Flashing : Lit : Off Status Indicator on projec- Indicator on Wire- less LAN unit The Wireless LAN unit not mounted or the Wireless LAN Power setting on the Wireless LAN menu is Off The Wireless LAN unit mounted to Insert the tabs on the cable cover into the two holes on the the projector but not connected to...

  • Page 145: Removing

    Installing Optional and Supplied Accessories Removing Procedure Loosen the two cable cover screws and then remove the cable cover.

  • Page 146: Appendix

    Appendix...

  • Page 147: Optional Accessories And Consumables

    Use this to project images from a computer via a wireless LAN. accessories and consumables is current as of: 2010.07. Details of accessories Quick Wireless Connection USB Key ELPAP08 (for the EB-G5950/ are subject to change without notice and availability may vary depending on G5650W) the country of purchase.

  • Page 148: Consumables

    Service Guide if you want to use this installation method. s Epson Projector Contact List Consumables Lamp unit (EB-G5600/G5500) ELPLP62 Lamp unit (EB-G5950/G5900/G5800/G5650W) ELPLP63 Use as a replacement for used lamps. Air filter ELPAF17 Use as a replacement for used air filters.

  • Page 149: Screen Size And Projection Distance

    16:9 Center of lens Vertical lens shift Screen size Minimum (Wide) to Maximum Maximum to Mini- (Tele) Projection Distance of EB-G5950/G5900/G5800/ 30" 66x37 84 - 155 -6 - +44 40" 89x50 114 - 208...

  • Page 150: Projection Distance Of Eb-G5650W

    Screen Size and Projection Distance Projection Distance of EB-G5650W 16:9 Vertical lens shift Units: cm Minimum (Wide) to Maximum Screen size Maximum to Mini- (Tele) 80" 180x100 230 - 416 -16 - +116 Vertical lens shift Screen size Minimum (Wide) to Maximum 100"...

  • Page 151: Supported Monitor Displays

    WXGA+ 60/75/85 1440x900 TV(NTSC) 720x480 SXGA 70/75/85 1152x864 TV(PAL,SECAM) 50/60 720x576 60/75/85 1280x1024 60/75/85 1280x960 Input signals from HDMI input port (EB-G5950/G5900/G5600 only) SXGA+ 60/75 1400x1050 UXGA 1600x1200 Signal Refresh Rate (Hz) Resolution (dots) MAC13" 640x480 640x480 MAC16" 832x624 SVGA 800x600 MAC19"...

  • Page 152: Supported Monitor Displays For Eb-G5650W

    Supported Monitor Displays Signal Refresh Rate (Hz) Resolution (dots) Signal Refresh Rate (Hz) Resolution (dots) SDTV(480p) 720x480 MAC16" 832x624 SDTV(576i) 720x576 MAC19" 1024x768 SDTV(576p) 720x576 1024x768 HDTV(720p) 50/60 1280x720 MAC21" 1152x870 HDTV(1080i) 50/60 1920x1080 Only compatible when Wide is selected as the Resolution from the configuration menu.

  • Page 153: Input Signals From Hdmi Input Port

    Supported Monitor Displays Input signals from HDMI input port Signal Refresh Rate (Hz) Resolution (dots) 640x480 SVGA 800x600 1024x768 WXGA 1280x800 SXGA 1280x960 1280x1024 SXGA+ 1400x1050 UXGA 1600x1200 SDTV(480i) 720x480 SDTV(480p) 720x480 SDTV(576i) 720x576 SDTV(576p) 720x576 HDTV(720p) 50/60 1280x720 HDTV(1080i) 50/60 1920x1080 HDTV(1080p)

  • Page 154: Specifications

    Specifications Projector General Specifications EB-G5950 EB-G5900 EB-G5800 EB-G5650W EB-G5600 EB-G5500 Product name Dimensions 470 (W) ^ 135 (H) ^ 311.5 (D) mm (not including foot and projection lens) 0.8" 0.74" wide 0.8" Panel size Display method Polysilicon TFT active matrix...
  • Page 155 *1 The specifications are when a standard lens is attached. When an optional lens is attached, check the Optional User's Guide supplied with the optional lenses. *2 The operating temperature is 0 to +35˚C when "Power Consumption" is set to Normal at an altitude of 1500 to 3000m. EB-G5950 EB-G5900...
  • Page 156 Specifications Stereo mini jack − Stereo mini jack − Audio Out port USB connector − USB connector − USB (Type A) port (Type A) (Type A) USB connector − USB connector − USB port (Type A) (Type A) (Only for Wireless LAN unit) LAN Port RJ-45...
  • Page 157 Personal Computers are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate Epson America, Inc. radio frequency energy and, if not installed and used in accordance with the Located at: 3840 Kilroy Airport Way instructions, may cause harmful interference to radio communications.

  • Page 158: Appearance

    Appearance Units: mm Center of lens Distance from center of lens to suspension bracket fixing point...

  • Page 159: Glossary

    AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. AMX Device Discovery Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details.
  • Page 160 Glossary A method of image scanning whereby the image data is divided into fine horizontal lines that are displayed in sequence starting from left to right and Interlace then from top to bottom. The even-numbered lines and odd-numbered lines are displayed alternately. A number to identify a computer connected to a Network.

  • Page 161: General Notes

    10.3.9," "Mac OS X 10.4.x," "Mac OS X 10.5.x," and "Mac OS X 10.6.x". Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this Furthermore, the collective term "Mac OS" is used to refer to them.
  • Page 162 This company, under the terms of the LGPL, discloses the source code for the free software used in this product based on the LGPL. Contact the support personnel as provided in the Epson Projector Contact list to reproduce, modify, and/or distribute the free software concerned.
  • Page 163 This General Public License applies to most of the Free Software Foundation's "EPSON Projector Contact List" in the User's Guide, and contact the customer software and to any other program whose authors commit to using it. (Some other Free support of your region.
  • Page 164 General Notes We protect your rights with two steps: (1) copyright the software, and (2) offer you this You may modify your copy or copies of the Program or any portion of it, thus license which gives you legal permission to copy, distribute and/or modify the software. forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these Also, for each author's protection and ours, we want to make certain that everyone...
  • Page 165 General Notes Accompany it with the complete corresponding machine-readable source Each time you redistribute the Program (or any work based on the Program), the code, which must be distributed under the terms of Sections 1 and 2 above on recipient automatically receives a license from the original licensor to copy, a medium customarily used for software interchange;...
  • Page 166 General Notes The Free Software Foundation may publish revised and/or new versions of the 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO General Public License from time to time. Such new versions will be similar in IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY spirit to the present version, but may differ in detail to address new problems or WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS...
  • Page 167 If you desire to receive the source code of the LGPL Programs, please see the pieces of it in new free programs; and that you are informed that you can do these "EPSON Projector Contact List" in the User's Guide, and contact the customer things.
  • Page 168 General Notes For example, if you distribute copies of the library, whether gratis or for a fee, you must For example, on rare occasions, there may be a special need to encourage the widest give the recipients all the rights that we gave you. You must make sure that they, too, possible use of a certain library, so that it becomes a de-facto standard.
  • Page 169 General Notes Activities other than copying, distribution and modification are not covered by These requirements apply to the modified work as a whole. If identifiable sections this License; they are outside its scope. The act of running a program using the of that work are not derived from the Library, and can be reasonably considered Library is not restricted, and output from such a program is covered only if its independent and separate works in themselves, then this License, and its terms, do...
  • Page 170 General Notes A program that contains no derivative of any portion of the Library, but is Accompany the work with the complete corresponding machine-readable designed to work with the Library by being compiled or linked with it, is called a source code for the Library including whatever changes were used in the work "work that uses the Library".
  • Page 171 General Notes Accompany the combined library with a copy of the same work based on the It is not the purpose of this section to induce you to infringe any patents or other Library, uncombined with any other library facilities. This must be property right claims or to contest validity of any such claims;...
  • Page 172 General Notes This library is free software; you can redistribute it and/or modify it under the NO WARRANTY terms of the GNU Lesser General Public License as published by the Free Software 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO Foundation;...
  • Page 173 General Notes Redistributions of source code must retain the above copyright notice, this list of This distribution contains the sixth public release of the Independent JPEG Group's free conditions and the following disclaimer. JPEG software. You are welcome to redistribute this software and to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
  • Page 174 General Notes We specifically permit and encourage the use of this software as the basis of commercial libpng-1.2.7 products, provided that all warranty or liability claims are assumed by the product License terms of conditions of each program which are provided by owner of the vendor.
  • Page 175 General Notes Tom Lane The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format Glenn Randers-Pehrson in commercial products. If you use this source code in a product, acknowledgment is not Willem van Schaik required but would be appreciated.
  • Page 176 General Notes The origin of this software must not be misrepresented; you must not claim The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an that you wrote the original software.
  • Page 177 General Notes License terms of conditions of each program which are provided by owner of the For MPEG-4 ASP: copyright to the “ncurses” are as follows. With respect to a Licensee offering MPEG-4 Video Decoders and/or Encoders the Copyright (c) 1998-2002,2003 Free Software Foundation, Inc. following notice shall be given: THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- Permission is hereby granted, free of charge, to any person obtaining a copy of this...

  • Page 178: Index

    Index indicator ............ 87 Computer1 input port ......13, 14 Computer2 input port ......13, 14 Focus ring ............. 10 Configuration Menu ........54 Foot adjust lever ........... 10 Connect to a Network Projector ..... 124 A/V Mute ..........17, 38 Freeze .............
  • Page 179 Index Keystone ..........25, 59 Operating temperature ......155 Quick Corner ......... 23, 59 Operation ............62 Optional accessories ........147 Others Menu ..........80 Lamp Hours ..........82 Rear foot ............11 Overheating ..........88 Lamp indicator ........87, 104 Rear projection ..........
  • Page 180 Index Software keyboard ........65 User's Logo Protect ........49 Source ............82 Source Left ............ 35 Source Right ..........35 Vertical lens shift dial ......11, 22 Source Search ........15, 18, 27 Video Signal ........... 58, 82 Specifications ..........154 Video1 input port ........

This manual is also suitable for:

Eb-g5900Eb-g5800Eb-g5650wEb-g5600Eb-g5500

Table of Contents