Connecting For The First Time - Epson EB-G5200W User Manual

Connecting with a USB Cable and Projecting (USB Display EB-G5350/G5150 only)

Connecting for the first time

f
A
Driver installation starts automatically.
When using a computer running Windows 2000, it is not
automatically installed. Open "My Computer" and then double-
click "EPSON_PJ_UD(X:)".
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest status, restart, and then try to connect
again. For more details, contact the nearest address provided in the
Support and Service Guide. s
B
Click "Agree".
If the driver is not installed, you cannot start USB Display. Select
"Agree". If you want to cancel installation, click "Disagree".
Epson Projector Contact List
C
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
• If for some reason nothing is projected, click "All
q
Programs" - "EPSON Projector" - "EPSON USB
Display" - "EPSON USB Display Vx.x", on your
computer.
• If it is not installed automatically, double-click "My
Computer" - "EPSON_PJ_UD" - "EMP_UDSE.EXE",
on your computer.
• To uninstall the driver, click "Start" menu - "EPSON
USB Display" - "Remove EPSON USB Display", on your
computer.
• Disconnecting
The projector can be disconnected simply by
disconnecting the USB cable. There is no need to use the
"Safely Remove Hardware" feature in Windows.
109