When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail,
see
"Reading Problem Mail Notification Function (EB-826W/825/85/84 only)"
Sub Menu
Mail Notification
SMTP Server
Port Number
Address 1 Setting
Address 2 Setting
Address 3 Setting
You can set whether or not (On/Off) to be notified by e-mail.
g
You can input the IP Address
for the SMTP Server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.
Input the Email Address and the contents of the Mail to receive notification when an abnormality or warning occurs in the projector. You can
enter up to 32 single-byte alphanumeric characters for the Email Address. You can select multiple problems or warnings to be notified about by