Table of Contents
Advertisement
List of Functions
Sub Menu
Reset
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for
each image signal.
You cannot make settings on the Signal menu when the source is LAN. (EB-826W/825/85)
Computer image
Sub Menu
Auto Setup
Resolution
g
Tracking
g
Sync.
Position
You can reset all adjustment values for the Image menu functions to their default settings. To return all menu items to their default settings, see
p.52
s
You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.
p.61
s
When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such
as when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.
You can adjust computer images when vertical stripes appear in the images. s
You can adjust computer images when flickering, fuzziness, or interference appear in the images. s
You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.
Function
g
Component Video
Function
p.61
g
g
Composite video
/S-Video
p.61
36
Advertisement
Table of Contents
