Table of Contents
Advertisement
Reading Problem Mail Notification Function (EB-826W/825/85/84 only)
When the Mail Notification function is set to On and a problem/
warning occurs in the projector, the following e-mail will be sent.
Subject: EPSON Projector
Line 1: The Projector Name where the problem has occurred
Line 2: The IP Address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item. To deal
with problems/warnings, see
Message
Internal error
Fan related error
Sensor error
Lamp cover is open.
Lamp timer failure
Lamp out
Internal temperature error
High-speed cooling in progress
Lamp replacement notification
No-signal
Auto Iris Error
"Reading the
Indicators".
p.55
s
Cause
Internal Error
Fan Error
Sensor Error
Lamp Cover Open
Lamp Failure
Lamp Error
High Temp Error
(Overheating)
High Temp Warning
Replace Lamp
No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
Auto Iris Error
Message
Power Err. (Ballast)
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with
Cause
Power Err. (Ballast)
89
Advertisement
Table of Contents
