Table of Contents
Advertisement
List of Functions
Wired LAN Menu
Sub Menu
IP Settings
IP Address Display
You can make settings related to the following addresses.
g
DHCP
: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses.
g
IP Address
: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However,
the following IP Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
g
Subnet Mask
: You can input the Subnet Mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
g
Gateway Address
: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the
address. However, the following Gateway Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To prevent the IP Address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
Function
47
Advertisement
Table of Contents
