Saving a User's Logo
D
Move the box to select the part of the image to use as the
User's Logo.
Using the Remote Control
You can save at up to 400 ^ 300 dots in size.
q
E
When Select this image? is displayed, select Yes.
Using the Control panel
F
Select the zoom factor from the zoom setting screen.
G
When the message Save this image as the User's Logo? is
displayed, select Yes.
The image is saved. After the image has been saved, the message
Completed. is displayed.
• Once a User's Logo has been saved, the logo cannot be returned
q
to the factory default.
• Saving the user's logo may take approximately 15 seconds. Do
not use the projector or any connected equipment while it is
saving, otherwise malfunctions may occur.
77