Changing The Projected Image; Automatically Detect Input Signal And Change The Projected Image (Source Search) - Epson EB 824 User Manual

Changing the Projected Image

You can change the projected image in the following two ways.
• Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
• Changes to the target image.
You can use the Remote Control buttons to change to the target
input port.
Automatically Detect Input Signal and Change
the Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button.
A
Computer1
B
Computer2
C
S-Video
D
Video
E
USB Display
F
USB: When image is from a device connected to USB Port (TypeA).
G
LAN: When the projector is connected to a computer via a
network, and images from EMP NS Connection are projected.
Skipped when no image signal is being input.
Only EB-826W/825/824/85 can switch to USB.
Only EB-826W/825/85 can switch to LAN.
Procedure
When your video equipment is connected, start playback before
beginning this operation.
Using the Remote Control
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
16
Using the Control panel