Adjustment Switch Of Headinglight Beam - Chery QQ3 User Manual

！Notice
For windshield should not be wiped when
there is no water in washer tank, so front
sight will be affected. Therefore, 1.Stop
vehicle to add washing liquid if it is
necessary to clean windshield during
running.2.Check washing liquid level
before a travel. In cold
windshield may freeze, which will disturb
driver's sight. Windshield should be
heated before it is applied. Do not apply
wiper if there is no water in washer tank.
Do not apply washer
overheating may damage 10 seconds in
case washer motor. In cold weather,
washing liquid may expand, which may
damage washing fluid tank and result in a
washer failure. Hence, it is sufficient to
fill washing tank with washing fluid to
3／4 of its capacity. Turning control lever
in the reverse direction of steering wheel
may operate luggage compartment cover
wiper and washer.
First position (Rest position)=Wiper
weather,
operative
Second
position)=Wiper and washer operative
simultaneously When control lever is
moved to first position, wiper will work;
more than
when control lever is moved to second
position, washing liquid will be injected
to rear window.
Instruments and control devices
position (Arm turning
！Notice
With no water, rear window wiper's
operation may scrape glass, which will
result in a premature deterioration of
wiper blades and disturb driver's front
visual field. Therefore, do not apply rear
window wiper when there is no water
available.
Adjustment Switch
Headinglight Beam
Turn on headlight low beam and adjust
headlight beam scop e for making a clear
view of front road.
0=Off
1=Front and rear foglight power switch
2=Headlight switch
Night light control switch is design to
regulate the intensity of instrument
cluster lighting.
of
64