Brake System Warning Light - Chery QQ3 User Manual

！Notice
If engine oil pressure warning light stays
on, it indicates a failure. If it happens
during driving, stop the vehicle to check
for the lack of engine oil as soon as
possible. Add engine oil if necessary. If
there is no problem with engine oil, go to
the nearest CHERY AUTO authorized
service station for inspection.
Brake system
light
With ignition switch on, the light should
light up after hand brake is applied. The
light should goes out after the hand brake
is released.
The hand brake should be released fully
before moving. If the light still remains
on after the hand brake is released, it
indicates a lack of brake fluid. Take the
following steps:

Park the vehicle at roadside.

Check the brake fluid level; add the
brake fluid specified by CHERY
AUTO CORPORATION to the
MAX mark if necessary.

If brake is ok and brake system is
warning
functional,
CHERY AUTO authorized service
station immediately at safe speed
for further inspection.

If a leakage of brake fluid is found,
the warning light remains on or the
brake functions improperly, tow the
vehicle
authorized
inspection and service.
Instruments and control devices
go to the nearest
to CHERY AUTO
service station for
！Notice
With ignition switch turned on and hand
brake applied, there may be failure in
brake system if the brake system warning
light isn't on. Lamp bulb should be
checked for malfunction. If the bulb is ok,
check the brake system; if brake fluid
warning light remains on, it indicates a
low brake fluid level
performance may be affected. If the
above happens during a driving, the
vehicle should be slowed down and
stopped for the following inspections
1.Check brake fluid reservoir and add
specified brake fluid if the liqu id level is
low.2.Check brake for function.3.If brake
functions normally, drive the vehicle to
service center slowly for inspection.4.If
warning light stays on while brake is
normal or a brake fluid leakage is found,
tow the vehicle to CHERY AUTO
authorized service station. If brake fluid
level is too low, the braking distance,
brake force and pedal range will be
increased.
and brake
48